Loading ...
Loading ...
Loading ...
Cleaning and maintenance
60
Programmed vapour clean cycle set-up
Like the other cooking functions the time at
which the vapour clean cycle starts can be
set.
1. After having selected the special function
Vapour Clean, press the symbol .
2. Enter the required time for the Vapour
Clean function (for example 19.30: first
touch the hours box, then the numbers 1
and 9; next, touch the minutes box and
then the numbers 3 and 0).
3. Press the symbol to confirm.
4. The appliance waits for the set start time
to be reached and then starts the
cleaning cycle.
End of the Vapour Clean cycle
1. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
2. Use an anti-scratch sponge with brass
filaments on tougher encrustations.
3. In case of grease residues use specific
oven cleaning products.
4. Remove the water left inside the oven.
For improved hygiene and to avoid food
being affected by any unpleasant odours,
we recommend that the oven is dried using
a fan assisted function at 160°C for
approximately 10 minutes.
We recommend wearing rubber
gloves for these operations.
For easier manual cleaning of the
parts difficult to reach, we
recommend removing the door.
Loading ...
Loading ...
Loading ...