Loading ...
Loading ...
Loading ...
ENGLISH
3.3 TIMER
This function can only be used when the
oven is off.
Press .
The timer flashes.
Adjust the timer with
and . Press OK to confirm. The timer will
then start.
Once the time has lapsed, there is a sound signal.
To stop it, press any key.
NB: You can modify or cancel the timer at any time.
To cancel, go back to the timer menu and set to
00:00. Without having to confirm, the adjustment
is automatically saved after a few seconds.
3.1 SETTING THE CLOCK
When switching on, the display flashes at 12:00.
Set the clock with or .
Confirm by pressing OK.
3.2 CHANGING THE CLOCK
The oven must be off.
Press twice on . The time of day flashes and
you can now set it.
Adjust the clock setting with or .
Confirm by pressing OK.
Installation
2
Setting the clock
3
Cooking «EXPERT»
4
3.4 KEYPAD LOCKING
When the oven is off, press
and
at the
same time until the symbol appears on the
screen. Do the same to unlock.
MANUAL COOKING MODES:
(depending on model)
The following cooking modes:
,,,,, , have a boost, which
rapidly increases the temperature. To de-activate
this mode, go to the settings chapter.
CIRCULATING HEAT*
Min temperature 35°C, max 250°C
Recommended for keeping white meat, fish and
vegetables moist. For cooking multiple items on up
to three levels.
2.1
CHOICE OF LOCATION AND FITTING
The diagrams show the dimensions of a cabinet
that will be able to hold your oven.
This appliance may be installed either under a
worktop (A) or in a column (B). If the cabinet is
open, its opening at the back must be 70 mm
maximum.
Install the oven in the furniture. To do this, remove
the rubber stops and pre-drill a 2-mm diameter
hole in the wall of the furniture to avoid splitting
the wood. Attach the oven with the two screws. Re-
position the rubber stops.
Tip
To be certain that you have properly
installed your appliance, do not hesitate to
call on a household appliance specialist.
ELECTRICAL CONNECTION
Your oven must be connected with a (standard)
power cable with 3 conductors of 1.5mm
2
(1 live +
1 neutral + earth) which must be connected to a
220-240V
~
single-phase grid by means of a 1 live
+ 1 neutral + earth CEI 60083 standard power
socket or via an all-poles cut-off device in compli-
ance with the installation rules.
The safety wire (green-yellow) is connected to the
appliance’s terminal and must be connected to the
earth terminal of the electrical set-up.
The fuse in your set-up must be 16 amperes.
We cannot be held responsible for any accident resulting
from inexistent, defective or incorrect earthing.
Caution
Before using your oven for the first time,
heat it to 200°C empty for around 1 hour.
Ensure that the room is sufficiently aired.
Warning :
If the electrical installation in your residence
requires any changes in order to hook up
your appliance, contact a professional elec-
trician.If the oven malfunctions in any way,
unplug the appliance or remove the fuse cor-
responding to the sector where the oven is
hooked up.
Loading ...
Loading ...
Loading ...