Loading ...
Loading ...
Loading ...
P a g e |15
ONLINE: TRINITYAPPLIANCES.COM.AU
4.4 CONNECTING THE HOB TO THE MAIN POWER SUPPLY
This hob must be connected to the mains power supply only by a
suitably qualified person. Before connecting the hob to the mains power
supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate.
3. The power supply cable sections can withstand the load specified on
the rating plate.
To connect the hob to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be
positioned so that its temperature will not exceed 75°C at any point.
Check with an electrician whether the domestic wiring system is
suitable without alterations. Any alterations must only be made by a
qualified electrician.
Brown = L or Live
Blue = N or Neutral
Green and Yellow = E or
Earth
IMPORTANT:
• If the cable is damaged or needs replacing, the operation must be carried
out by the after-sale agent with dedicated tools to avoid any accidents.
• If the appliance is being connected directly to the mains supply, an
omni polar circuit breaker must be installed with a minimum gap of 3
mm between the contacts.
• The installer must ensure that the correct electrical connection has been
made and that it complies with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised
technicians only.
This appliance requires a 32 Amp Miniature Circuit Breaker.
Loading ...
Loading ...
Loading ...