Loading ...
Loading ...
Loading ...
7
ENG
Disconnect the power before moving or installing the TV. Otherwise electric shock may occur.
Remove the stand before installing the TV on a wall mount by performing the stand attachment in
reverse.
If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an
authorized wall mount and contact the local dealer or qualified personnel. Otherwise it is not
covered by the warranty.
Do not over tighten the screws as this may cause damage to the TV and void your warranty
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the
installation instructions.
Use the screws and wall mounts that meet the following specifications. Any damages or injuries by
misuse or using an improper accessory are not covered by the warranty.
Model Size
32”
40” 43”
Top Down Top Down Top Down
Screw
Diameter (mm) "E" M4 M4 M6 M6 M6 M6
Depth (mm)
“D”
Max 9 9 25 15 21 14
Min 6 6 13 6 10 5
Quantity 2 2 2 2 2 2
VESA (AxBxC) 200x200x200 200x200x200 200x200x200
Note:
1. The pictures are for reference only.
2. For the TV sets with terminals towards the wall, in order to leave enough space to use the
terminals, a rubber cushion is needed together with the screw to fix the wall mount. It is a small
hollow pillar whose internal diameter is 8mm, external diameter is 18mm and height is 30mm.
Inadequate use of batteries may cause leakage. Therefore, please follow the steps below and use
them with care.
1. Please note the batteries polarity to avoid short circuit.
2. If the battery voltage is insufficient, which affects the remote control range, you should replace
Precautions for Using Battery
Use the remote control by pointing it towards the remote sensor. The items between the remote
control and the remote sensor will interfere with the normal operation.
Do not expose the remote control to violent vibrations. Also, do not splash liquid on the remote
control and do not place the remote control in high humidity areas.
Do not expose the remote control to direct sunlight which can cause deformation of the unit due
to heat.
When the remote sensor is exposed to direct sunlight or strong light, the remote control will
not work. If this is the case, please change the light direction or the position of the TV, or use the
remote control closer to the remote sensor.
Precautions for Using Remote Control
Loading ...
Loading ...
Loading ...