Loading ...
Loading ...
Loading ...
E-7
FILTER REPLACEMENT
The Replace Filter Indicator light will illuminate when it is time to replace the carbon and HEPA
filters, depending on usage and environmental conditions the filters will last approximately
6 months. The filters will be covered in dust when dirty and need replacing. It is important to
maintain and change the filters to continue to optimize the performance of the purifier.
IMPORTANT: DO NOT wash and re-use the filters. Please contact Customer Service to purchase
replacement filters. Use only Genuine Guardian Technologies Replacement Parts to optimize the
performance of your air purifier.
1. Turn off and unplug the unit.
2. Remove the side panel by grasping the cover at the openings on each side, pull out then
lift panel from base.
3. Remove and clean dust and debris from the pre-filter screen with a vacuum hose.
4. Remove and dispose of the carbon and HEPA filters.
5. Replace by first inserting HEPA filter, followed by the Activated Carbon filter, then the pre-screen.
Secure the pre-screen by inserting into the frame into the openings in the base of the filter
compartment.
6. Return the filter panel by inserting the base of the frame into the opening on the bottom of the
purifier, then close at the top to secure.
7. Touch and hold the Auto control for 3 seconds to reset the reminder.
NOTE: Both sides of the machine have a filter. Removal and replacement instructions are
the same. When finished, make sure both side filter panels are closed properly. Unit will not
function when panels are open.
FILTER:
Model No. FLT6100
U
Check out our
Filter Replacement Program
www.guardiantechnologies.com
™
REPLACEMENT PARTS
TEMP
ºF
AQI
Auto
TEMP
ºF
AQI
Auto
TEMP
ºF
AQI
Auto
Pre-Filter
Screen
HEPA and Activated Carbon Filters
IMPORTANT: To maintain performance of the air cleaner, use
Guardian Technologies GENUINE Replacement Parts only.
To purchase visit our website www.guardiantechnologies.com.
Loading ...
Loading ...
Loading ...