Hikvision DS-2CD2T87G2P-LSU/SL 4MM User Manual

Loading ...

Click Save.

Set Region Entrance Detecon

It is used to detect objects entering a predened virtual region from the outside place. If it occurs,

the device can take linkage acons.

Before You Start

●

Go to VCA → VCA Resource , and select Smart Event.

●

For the device supporng HEOP, go to VCA → APP to import and enable Smart Event.

Steps

Go to VCA → Smart Event → Region Entrance Detecon .

Check Enable.

Select a Region. For the detecon region sengs, refer to Draw Area .

Set the minimum size and the maximum size for the target to improve detecon accuracy. Only

targets whose size are between the maximum size and the minimum size trigger the detecon.

For the detail sengs, refer to Set Size Filter .

Set the detecon target, sensivity and the target validity.

Sensivity

It stands for the percentage of the body part of an acceptable target that goes across the

predened region. Sensivity = 100 - S1/ST × 100. S1 stands for the target body part that goes

across the predened region. ST stands for the complete target body. The higher the value of

sensivity is, the more easily the alarm can be triggered.

Detecon Target

Human and vehicle are available. If the detecon target is not selected, all the detected

targets will be reported, including the human and vehicle.

Target Validity

If you set a higher validity, the required target features should be more obvious, and the

alarm accuracy would be higher. The target with less obvious features would be missing.

Network Camera User Manual

Loading ...

Hikvision DS-2CD2T87G2P-LSU/SL 4MM ColorVu DS-2CD2T87G2P-LSU/SL 8MP Outdoor Panoramic Bullet Network Camera