Loading ...
Loading ...
Loading ...
EN
W415-2016 / 07.12.22
7
operating your appliance
2.0 operating your appliance
To turn the appliance on:
When operating your appliance for the first time, there is a required burn-in process that cures materials used
to manufacture the appliance that may emit both vapors and an odor. These are normal when operating a new
appliance for the first time. Ensure adequate air circulation is provided during burn-in process, if this was not
completed by the installer during installation.
A Turn the remote on.
B After 3-5 seconds, the control will start a spark at the pilot, light the pilot and then the burner. The spark
period will last 60 seconds, or until the pilot has lit.
C When used for the first time, if the burn-in process was not completed by the installer; run appliance
continuously for minimum 4 hours (burn-in).
D Turn the appliance off. Wait until appliance is completely cool before moving to the next step.
E Remove the safety barrier, door trims and firebox glass door. Clean firebox glass door (see “maintenance”
section). Replace firebox glass door, door trims and safety barrier.
For more detailed information, see your installation manual or contact your authorized dealer.
2.1 on/off components
2.2 using your appliance
| Wall switch | USB Power Pack | Receiver | Remote control |
(Optional)
(Optional)
ON
OFF
(Not supplied)(Not supplied)
Loading ...
Loading ...
Loading ...