Makita XRH08PT User Manual

Loading ...

10 ENGLISH

If a long drill bit is installed, extend the guide by pushing

up the extension button.

►1. Extension button

Adjusting the drilling depth of the

dust collection system

Optional accessory

Slidethedepthadjustmentbuttontothedesiredposi-

tionwhilepushingitup.Thedistance(A)isthedrilling

depth.

►1.Depthadjustmentbutton

Torque limiter

NOTICE: As soon as the torque limiter actuates,

switch off the tool immediately.Thiswillhelppre-

vent premature wear of the tool.

NOTICE: Drill bits such as hole saw, which tend

to pinch or catch easily in the hole, are not appro-

priate for this tool.Thisisbecausetheywillcause

the torque limiter to actuate too frequently.

Thetorquelimiterwillactuatewhenacertaintorque

levelisreached.Themotorwilldisengagefromthe

output shaft. When this happens, the drill bit will stop

turning.

Electronic function

Thetoolisequippedwiththeelectronicfunctionsfor

easy operation.

• Constantspeedcontrol

Thespeedcontrolfunctionprovidestheconstant

rotation speed regardless of load conditions.

• ActiveFeedbacksensingTechnology(ForXRH10/

XRH11)

If the tool is swung at the predetermined accelera-

tion during operation, the motor is forcibly stopped

to reduce the burden on the wrist.

NOTE:Thisfunctiondoesnotworkiftheacceleration

does not reach the predetermined one when the tool

is swung.

NOTE: If the bit is swung at the predetermined

acceleration during chipping, scaling, or demolishing,

the motor is forcibly stopped. In this case, release

the switch trigger, and then pull the switch trigger to

restart the tool.

Electric brake

Thistoolisequippedwithanelectricbrake.Ifthetool

consistently fails to quickly stop after the switch trigger

is released, have the tool serviced at a Makita service

center.

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before carrying out any work on the tool.

Side grip (auxiliary handle)

CAUTION: Always use the side grip to ensure

safe operation.

CAUTION: After installing or adjusting the

side grip, make sure that the side grip is rmly

secured.

Toinstallthesidegrip,followthestepsbelow.

1. Loosen the thumb screw on the side grip.

►1.Thumbscrew

Loading ...

Makita XRH08PT 36V 18V X2 LXT Brushless 1‑1/8" AVT Rotary Hammer Kit, accepts SDS‑PLUS bits 5.0Ah

User Manual - Page 10