1. Home
  2. Delonghi
  3. Delonghi ECAM22110BPK User Manual

Delonghi ECAM22110BPK Compact Magnifica S Fully Automatic Coffee Machine Black Package

Product's Documents

Below are documents related to this product, you can read online or download:
User Manual Specification
Main documentSpecificationQuestions and answersRelateds Products
ECAM22110BPK photo

More photos

User Manual

This is the main product document for model ECAM22110BPK.

The file format is pdf, 14 pages, you can download this manual here .

background
6
7
INTRODUCTION
Thank you for choosing the ECAM 22.110 automatic coee and
cappuccino maker.
We hope you enjoy using your new appliance.
Take a few minutes to read these instructions.
This will avoid all risks and damage to the machine.
Symbols used in these instructions
Important warnings are identied by these symbols.
These warnings must absolutely be respected.
Danger!
Failure to observe the warning could result in possibly life
threatening injury from electric shock.
Important!
Failure to observe the warning could result in injury or damage
to the appliance.
Danger Of burns!
Failure to observe the warning could result in scalds or burns.
Please note :
This symbol identies important advice or information for the
user.
Letters in brackets
The letters in brackets refer to the legend in the Description of
the Appliance on page2-3.
Troubleshooting and repairs
In the event of problems, rst try and resolve them following
the information given in the section “Explanation of lights” on
page 18 and “Troubleshooting” on page 19.
If this does not resolve the problem or you require further
information, you should consult Customer Services by calling
the number given on the annexed “Customer Service” sheet.
If your country is not among those listed on the sheet, call the
number given in the guarantee.
If repairs are required, contact De’Longhi Customer Services
only.
The addresses are given in the guarantee certicate provided
with the appliance.
CONTENTS
INTRODUCTION .......................................................7
Symbols used in these instructions ...........................................7
Letters in brackets .....................................................................7
Troubleshooting and repairs ..................................................... 7
SAFETY ...................................................................7
Fundamental safety warnings ..................................................7
DESIGNATED USE .....................................................7
INSTRUCTIONS ........................................................8
DESCRIPTION ..........................................................8
Description of the appliance .....................................................8
Description of the control panel ................................................ 8
Description of the accessories ...................................................8
Description of lights ..................................................................9
PRELIMINARY CHECKS .............................................9
Checking the appliance ............................................................. 9
Installing the appliance ............................................................9
Connecting the appliance ......................................................... 9
Using the appliance for the rst time ......................................10
TURNING THE APPLIANCE ON .................................10
TURNING THE APPLIANCE OFF ...............................10
AUTOOFF ..............................................................10
ENERGY SAVING .....................................................11
WATER SOFTENER FILTER .......................................11
Installing the lter ..................................................................11
Removing and replacing the lter ..........................................11
MAKING COFFEE ....................................................11
Selecting the coee taste ........................................................ 11
Selecting the quantity of coee in the cup .............................12
Adjusting the coee mill .........................................................12
Setting the temperature .........................................................12
Tips for a hotter coee ............................................................12
Making coee using coee beans ...........................................12
Making coee using pre-ground coee .................................. 13
MAKING CAPUCCINO .............................................13
Cleaning the cappuccino maker after use ................................ 13
HEATING WATER ....................................................14
CLEANING .............................................................14
Cleaning the coee maker ...................................................... 14
Cleaning the drip tray and condensate tray ............................. 14
Cleaning the inside of the coee maker ..................................14
Cleaning the water tank .......................................................... 14
Cleaning the coee spouts ...................................................... 14
Cleaning the pre-ground coee funnel ...................................15
Cleaning the infuser ................................................................15
DESCALE ...............................................................15
SETTING WATER HARDNESS ....................................16
Measuring water hardness ...................................................... 16
Set water hardness ................................................................. 16
TECHNICAL SPECIFICATION .....................................16
DISPOSAL ..............................................................17
EXPLANATION OF LIGHTS .......................................18
TROUBLESHOOTING ...............................................19
background
6
7
INTRODUCTION
Thank you for choosing the ECAM 22.110 automatic coee and
cappuccino maker.
We hope you enjoy using your new appliance.
Take a few minutes to read these instructions.
This will avoid all risks and damage to the machine.
Symbols used in these instructions
Important warnings are identied by these symbols.
These warnings must absolutely be respected.
Danger!
Failure to observe the warning could result in possibly life
threatening injury from electric shock.
Important!
Failure to observe the warning could result in injury or damage
to the appliance.
Danger Of burns!
Failure to observe the warning could result in scalds or burns.
Please note :
This symbol identies important advice or information for the
user.
Letters in brackets
The letters in brackets refer to the legend in the Description of
the Appliance on page2-3.
Troubleshooting and repairs
In the event of problems, rst try and resolve them following
the information given in the section “Explanation of lights” on
page 18 and “Troubleshooting” on page 19.
If this does not resolve the problem or you require further
information, you should consult Customer Services by calling
the number given on the annexed “Customer Service” sheet.
If your country is not among those listed on the sheet, call the
number given in the guarantee.
If repairs are required, contact De’Longhi Customer Services
only.
The addresses are given in the guarantee certicate provided
with the appliance.
SAFETY
Fundamental safety warnings
Danger!
This is an electrical appliance and may cause electric shock.
You should therefore respect the following safety warnings:
• Nevertouchtheappliancewithdamphandsorfeet.
• Nevertouchtheplugwithdamphands.
• Makesurethesocketusedisfreelyaccessibleatalltimes,
enabling the appliance to be unplugged when necessary.
• Unplugdirectlyfromtheplugonly.Neverpullthepower
cable as you could damage it.
• Todisconnecttheappliancecompletely,placethemain
switch at the back of the appliance in the 0 position (g.
3).
• Iftheapplianceisfaulty,donotattempttorepair.
Turn it o, unplug from the mains socket and contact
Customer Services.
• Iftheplugorpowercableisdamaged,itmustbereplaced
by De’Longhi Customer Services only to avoid all risk.
Important!
Keep all packaging (plastic bags, polystyrene foam) away from
children.
Important!
The appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that they do not play
with the appliance.
Danger: burns!
This appliance produces hot water and steam may form while
it is in operation.
Avoid contact with splashes of water or hot steam.
DESIGNATED USE
This appliance is designed and made to prepare coee and heat
drinks.
All other use is considered improper.
This appliance is not suitable for commercial use.
The manufacturer is not liable for damage deriving from
improper use of the appliance.
This is an household appliance only.
DESCALE ...............................................................15
SETTING WATER HARDNESS ....................................16
Measuring water hardness ...................................................... 16
Set water hardness ................................................................. 16
TECHNICAL SPECIFICATION .....................................16
DISPOSAL ..............................................................17
EXPLANATION OF LIGHTS .......................................18
TROUBLESHOOTING ...............................................19
background
8
9
It is not intended to be used in:
• sta kitchen areas in shops, oces and other working
environments;
• farmhouses;
• by clients in hotels, motels and other residential type
environments;
• bedandbreakfasttypeenvironments.
INSTRUCTIONS
Read these instructions carefully before using the appliance.
- Failure to follow these instructions may result in burns or
damage to the appliance.
The manufacturer is not liable for damage deriving from
failure to respect these instructions.
Please note :
Keep these instructions. If the appliance is passed to other
persons, they must also be provided with these instructions.
DESCRIPTION
Description of the appliance
(page 3 - A )
A1. Control panel
A2. Grinding adjustment dial
A3. Cup shelf
A4. Beans container lid
A5. Pre-ground coee funnel lid
A6. Pre-ground coee funnel
A7. Beans container
A8. Main switch
A9. Water tank
A10. Infuser door
A11. Infuser
A12. Coee spout (adjustable height)
A13. Coee grounds container
A14. Condensate tray
A15. Cup tray
A16. Drip tray water level indicator
A17. Drip tray
A18. Cappuccino maker
A19. Steam/hot water dial
Description of the control panel
(page 2 - B )
B1. Lights
B2. button: turns the appliance on and o.
B3. button: to make 1 cup of espresso coee
B4. button: to make 2 cups of espresso coee
B5. button: to rinse or descale the appliance
B6. Selection dial: turn to select the required quantity of
coee or use pre-ground coee
B7. button: to deliver steam to make hot drinks with
milk.
B8. button: to make 1 cup of espresso coee
B9. button: to make 2 cups of espresso coee
Description of the accessories
(pag. 2 - C )
C1. Measure
C2. Descaler bottle
C3. Water softener lter
Description of lights
Light ashing: the machine is heating up or a
rinse cycle is underway.
The appliance is delivering one or two cups of
espresso coee.
The appliance is delivering one or two cups of
long coee.
Light on steadily: the “steam” function has
been selected;
Light ashing: you must turn the steam dial.
An alarm is displayed on the control panel (see
the section: “Explanation of lights” on page
17).
Light on steadily: the grounds container is
missing and must be inserted in the appliance;
Light ashing: the grounds container is full and
must be emptied.
Light on steadily: the water tank is missing;
Light ashing: there is not enough water in the
tank.
Light ashing: the appliance must be descaled
(see the section “Descaling”).
Light on steadily: the appliance is performing
a descaling cycle.
ECO ECO “Energy Saving” mode is active.
background
8
9
DESCRIPTION
Description of the appliance
(page 3 - A )
A1. Control panel
A2. Grinding adjustment dial
A3. Cup shelf
A4. Beans container lid
A5. Pre-ground coee funnel lid
A6. Pre-ground coee funnel
A7. Beans container
A8. Main switch
A9. Water tank
A10. Infuser door
A11. Infuser
A12. Coee spout (adjustable height)
A13. Coee grounds container
A14. Condensate tray
A15. Cup tray
A16. Drip tray water level indicator
A17. Drip tray
A18. Cappuccino maker
A19. Steam/hot water dial
Description of the control panel
(page 2 - B )
B1. Lights
B2. button: turns the appliance on and o.
B3. button: to make 1 cup of espresso coee
B4. button: to make 2 cups of espresso coee
B5. button: to rinse or descale the appliance
B6. Selection dial: turn to select the required quantity of
coee or use pre-ground coee
B7. button: to deliver steam to make hot drinks with
milk.
B8. button: to make 1 cup of espresso coee
B9. button: to make 2 cups of espresso coee
Description of the accessories
(pag. 2 - C )
C1. Measure
C2. Descaler bottle
C3. Water softener lter
Description of lights
Light ashing: the machine is heating up or a
rinse cycle is underway.
The appliance is delivering one or two cups of
espresso coee.
The appliance is delivering one or two cups of
long coee.
Light on steadily: the “steam” function has
been selected;
Light ashing: you must turn the steam dial.
An alarm is displayed on the control panel (see
the section: “Explanation of lights” on page
17).
Light on steadily: the grounds container is
missing and must be inserted in the appliance;
Light ashing: the grounds container is full and
must be emptied.
Light on steadily: the water tank is missing;
Light ashing: there is not enough water in the
tank.
Light ashing: the appliance must be descaled
(see the section “Descaling”).
Light on steadily: the appliance is performing
a descaling cycle.
ECO ECO “Energy Saving” mode is active.
PRELIMINARY CHECKS
Checking the appliance
After removing the packaging, make sure the product is
complete and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact De’Longhi Customer Services.
Installing the appliance
Important!
When installing the appliance, respect the following safety
warnings:
• Theappliancecouldbedamagedifthewateritcontains
freezes.
Do not install the appliance in a room where the
temperature could drop below freezing point.
• Theappliancegivesoheat.
After positioning the appliance on the worktop, leave
a space of at least 3 cm between the surfaces of the
appliance and the side and rear walls and at least 15 cm
above the coee maker.
• Waterpenetratingthecoeemakercouldcausedamage.
Do not place the appliance near taps or sinks.
• Arrangethepowercableinsuchawaythatitcannotbe
damaged by sharp edges or contact with hot surfaces
(e.g. electric hot plates).
Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to
the value indicated on the rating plate on the bottom of the
appliance.
Connecttheappliancetoanecientlyearthedandcorrectly
installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied
professional.
background
10
11
Using the appliance for the rst time
Please note :
• Coeehasbeenusedtofactorytesttheapplianceandit
is therefore completely normal for there to be traces of
coee in the mill.
The machine is, however, guaranteed to be new.
• Youshouldcustomisewaterhardnessassoonaspossible
following the instructions in the section “Setting water
hardness” on page 16.
Follow the instructions:
1. Remove the water tank, ll to the MAX line with fresh
water (g. 1A) then put back in the appliance (g. 1B).
2. Place a container with a minimum capacity of 100 ml
under the cappuccino maker (g. 2).
3. Plug the appliance into the mains socket and place the
main switch on the back of the appliance in the I position
(g. 3).
4. The light ashes on the control panel (g. 4).
5. 5. Turn the steam dial to the “I” position (g. 5). The
appliance delivers water from the cappuccino maker then
goes o.
6. Turn the steam dial to the “0” position.
The coee maker is now ready for normal use.
Please note :
• Whenusingtheapplianceforthersttime,youneedto
make 4-5 cups of coee or 4-5 cappuccinos before the
appliance starts to give satisfactory results.
TURNING THE APPLIANCE ON
Please note :
• Before turning the appliance on, make sure the main
switch on the back of the appliance is in the I position (g.
3).
• Each time the appliance is turned on, it performs an
automatic preheat and rinse cycle which cannot be
interrupted. The appliance is ready for use only after
completion of these cycles.
Danger Of burns!
During rinsing, a little hot water comes out of the coee spouts
and is collected in the drip tray underneath.
Avoid contact with splashes of water.
• To turn the appliance on, press the (g. 6): The
corresponding light ashes while the appliance is
heating up and performing an automatic rinse cycle (by
circulating hot water, the appliance heats both the boiler
and the internal circuits).
The appliance is at temperature when the light goes o and
the lights corresponding to the coee buttons come on.
TURNING THE APPLIANCE OFF
Each time the appliance is turned o, it performs an automatic
rinse cycle which cannot be interrupted.
Danger Of burns!
During rinsing, a little hot water ows from the coee spouts.
Avoid contact with splashes of water.
To turn the appliance o, press the button (g. 6). The
appliance performs a rinse cycle, then goes o.
Please note :
If the appliance is not used for an extended period, also place
the main switch in the 0 position (g. 3).
Important!
To avoid damaging the appliance, do not place the main switch
(g. 3) in the 0 position until the appliance has been turned o
using the button.
AUTOOFF
The appliance is set to turn o automatically if not used for 2
hours.
The time can be changed so that the appliance switches o
after 15 or 30 minutes, or after 1, 2 or 3 hours.
The set the auto-o, proceed as follows:
1. With the machine o and the main switch in I position
(g. 3), press the button and keep it pressed until the
lights on the control panel come on.
2. Press the button (on the left side of the dial) until
until the lights corresponding to the number of hours be-
fore the appliance goes o automatically come on:
15 minutes ECO
30 minutes ECO
1 hour ECO
2 hours ECO
3 hours ECO
3. Press the button (on the left side of the dial) to
conrm; the lights switch o.
ENERGY SAVING
Use this function to enable or disable energy saving mode.
When enabled, the function reduces energy consumption in
compliance with European regulations.
Energy saving mode is active when the green ECO light is on
(g. 7).
1. With the appliance o and the main switch in the I
position (g. 3), press the button and hold it down
until the ECO light comes on (g. 7).
2. To disable the mode, press the button (on the left of
the dial). The ECO light ashes.
3. To re-enable the mode, press the ECO button (on the left
of the dial) again. The ECO light comes on steadily.
4. Press the button (on the right of the dial) to
conrm the selection. The ECO light goes o.
Please note :
A few seconds may elapse between energy saving mode
and delivery of the rst coee as the appliance must heat up
again.
WATER SOFTENER FILTER
Certain models are tted with a water softener lter. If this
is not the case with your model, you are recommended to
purchase one from De’Longhi Customer Services.
Important:
• Keepinacooldryplaceoutofdirectsunlight.
• Afteropeningthepac,,usethelteratonce.
• Removetheltebeforedescalingthemachine.
To use the lter correctly, follow the instructions below.
Installing the lter
1. Remove the lter from packaging and rinse the lter with
about half a litre of tap water (g. 8).
2. Rotate the calendar disk so that the next two months are
displayed (g. 9).
Please note:
The lter lasts about two months if the appliance is used
normally. If the coee maker is left unused with the lter
installed, it will last a maximum of three weeks.
3. Remove the tank from the appliance and ll with water
(g. 1A).
4. Insert the lter in the water tank and immerse it
completely, sloping it to enable the air bubbles to escape
(g. 10).
5. Insert the lter in the lter housing and press as far as it
will go (g. 11).
background
10
11
circulating hot water, the appliance heats both the boiler
and the internal circuits).
The appliance is at temperature when the light goes o and
the lights corresponding to the coee buttons come on.
TURNING THE APPLIANCE OFF
Each time the appliance is turned o, it performs an automatic
rinse cycle which cannot be interrupted.
Danger Of burns!
During rinsing, a little hot water ows from the coee spouts.
Avoid contact with splashes of water.
To turn the appliance o, press the button (g. 6). The
appliance performs a rinse cycle, then goes o.
Please note :
If the appliance is not used for an extended period, also place
the main switch in the 0 position (g. 3).
Important!
To avoid damaging the appliance, do not place the main switch
(g. 3) in the 0 position until the appliance has been turned o
using the button.
AUTOOFF
The appliance is set to turn o automatically if not used for 2
hours.
The time can be changed so that the appliance switches o
after 15 or 30 minutes, or after 1, 2 or 3 hours.
The set the auto-o, proceed as follows:
1. With the machine o and the main switch in I position
(g. 3), press the button and keep it pressed until the
lights on the control panel come on.
2. Press the button (on the left side of the dial) until
until the lights corresponding to the number of hours be-
fore the appliance goes o automatically come on:
15 minutes ECO
30 minutes ECO
1 hour ECO
2 hours ECO
3 hours ECO
3. Press the button (on the left side of the dial) to
conrm; the lights switch o.
ENERGY SAVING
Use this function to enable or disable energy saving mode.
When enabled, the function reduces energy consumption in
compliance with European regulations.
Energy saving mode is active when the green ECO light is on
(g. 7).
1. With the appliance o and the main switch in the I
position (g. 3), press the button and hold it down
until the ECO light comes on (g. 7).
2. To disable the mode, press the button (on the left of
the dial). The ECO light ashes.
3. To re-enable the mode, press the ECO button (on the left
of the dial) again. The ECO light comes on steadily.
4. Press the button (on the right of the dial) to
conrm the selection. The ECO light goes o.
Please note :
A few seconds may elapse between energy saving mode
and delivery of the rst coee as the appliance must heat up
again.
WATER SOFTENER FILTER
Certain models are tted with a water softener lter. If this
is not the case with your model, you are recommended to
purchase one from De’Longhi Customer Services.
Important:
• Keepinacooldryplaceoutofdirectsunlight.
• Afteropeningthepac,,usethelteratonce.
• Removetheltebeforedescalingthemachine.
To use the lter correctly, follow the instructions below.
Installing the lter
1. Remove the lter from packaging and rinse the lter with
about half a litre of tap water (g. 8).
2. Rotate the calendar disk so that the next two months are
displayed (g. 9).
Please note:
The lter lasts about two months if the appliance is used
normally. If the coee maker is left unused with the lter
installed, it will last a maximum of three weeks.
3. Remove the tank from the appliance and ll with water
(g. 1A).
4. Insert the lter in the water tank and immerse it
completely, sloping it to enable the air bubbles to escape
(g. 10).
5. Insert the lter in the lter housing and press as far as it
will go (g. 11).
6. Close the tank with the lid (g. 12), then replace the tank
in the machine.
7. Place a container (min. capacity: 100 ml) under the
cappuccino maker.
8. Turn the steam dial in position I to deliver hot water.
9. Let the appliance to deliver hot water for a few seconds, til
the delivery ows regulary, then turn the dial in position 0.
Please note:
Itmayhappenthatasinglehotwaterisnotsucienttoinstall
the lter: the lghts come on.
In this case, repeat the installing operation from step 8.
The new lter is active and you can now use the coee maker.
Removing and replacing the lter
After rwo months (see date indicator) or when the appliance
has not been used for 3 weeks, you should remove the lter
and replace with a new one, proceeding as described at the
previous paragraph.
MAKING COFFEE
Selecting the coee taste
Turn the coee taste selection dial (B6) to set the required
taste. Turning it clockwise increases the quantity of coee
beans the appliance will grind and therefore the strength of
the coee obtained.
TurnthedialtoMINforanextramildcoeeandtoMAXforan
extra strong coee.
Please note :
• Thersttimeyouusetheappliance,youwillneedtomake
a number of coees to identify the correct dial position
through trial and error.
• DonotturnthedialtoofartowardsMAX,otherwisethe
coee may be delivered too slowly (a drop at a time),
particularly when making two cups of coee at the same
time.
background
12
13
Selecting the quantity of coee in the cup
The appliance is set by default to automatically make the
following quantities of coee:
- espresso coee, when the button is pressed
(≃40ml);
- long coee when the button (≃120ml) is pressed;
- two espresso coees, when the button is pressed;
- two long coees, when the button is pressed.
To change the quantity of coee the appliance delivers
automatically into the cup, proceed as described below:
- press the button corresponding to the quantity to be
modied and hold it down until the light ashes and the
appliance starts delivering coee. Release the button;
- when the coee in the cup reaches the required level, press
the same button again to memorise the new amount.
The quantity of coee in the cup has now been programmed.
Adjusting the coee mill
The coee mill is preset in the factory to make coee correctly
and should not require adjusting initially.
However, if after making the rst few coees you nd that the
coee is too thin and not creamy enough or that delivery is too
slow (a drop at a time), this can be corrected by adjusting the
grinding adjustment dial (g. 13).
Please note :
The grinding adjustment dial must only be turned when the
coee mill is in operation.
If the coee is delivered too slowly or
not at all, turn one click clockwise.
For fuller bodied creamier coee,
turn one click anticlockwise (do
not turn more than one click at a
time otherwise the coee could be
delivered a drop at a time).
These adjustments will only be evident after at least 2 cups of
coee have been delivered.
If this adjustment does not obtain the desired result, turn the
dial another click.
Setting the temperature
To modify the temperature of the water used to make the
coee, proceed as follows:
1. With the appliance o and the main switch in the I
position (g. 3), press the button and hold it
down until the lights on the control panel come on.
2. Press the button to select the required
temperature:
LOW HIGH
3. Press the button to conrm the selection. The
lights go o.
Tips for a hotter coee
For a hotter coee, before delivery you are recommended to:
• rinse the appliance through by pressing the
button. Hot water ows out of the coee spouts and
heats the internal circuit of the machine so that the coee
delivered will be hotter.
• warm the cups with hot water (using the hot water
function);
• setahottercoeetemperature(seesection“Settingthe
temperature”).
Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and damage it.
1. Fill the container with coee beans (g. 9).
2. Place under the coee spouts:
- 1 cup if you want one coee (g. 10);
- 2 cups if you want 2 coees (g. 11).
3. Lower the spouts as near as possible to the cup. This makes
a creamier coee (g. 12).
4. Press the button corresponding to the number of coees
required
5. Preparation begins and the light corresponding to the
selected button ashes on the control panel.
Once the coee has been made, the appliance is ready for use
again.
Please note :
• Whilethecoeemakerismakingcoee,deliverycanbe
interrupted at any moment by pressing one of the coee
buttons.
• Attheendofdelivery,toincreasethequantityofcoee
in the cup, just press (within 3 seconds) one of the coee
buttons.
Please note :
For hotter coee, see the section “Tips for a hotter coee”.
Important!
• Ifthecoeeisdelivereda dropatatime, toothin and
not creamy enough or too cold, read the tips in the
“Troubleshooting” section on page 19.
• Lightsmaybedisplayedonthecontrolpanelduringuse.
Their meaning is given in the section “Explanation of the
lights” on page 18.
Making coee using pre-ground coee
Important!
• Neverplacecoeebeansinthepre-groundcoeefunnel
as this could damage the appliance.
• Neveraddpre-groundcoeewhenthemachineisoorit
could spread through the inside of the machine and dirty
it. This could damage the appliance.
• Never use more than 1 level
measure or it could dirty the
inside of the coee maker or
block the funnel.
Please note :
When using pre-ground coee, you can only make one cup of
coee at a time.
1. Make sure the appliance is on.
2. Turn the coee taste selection dial anticlockwise as far as
it will go to the position (g. 18).
3. Make sure the funnel is not blocked, then add one level
measure of pre-ground coee (g. 19).
4. Place a cup under the coee spouts.
5. Press the 1 cup coee button ( or ).
6. Preparation begins.
MAKING CAPUCCINO
Danger of burns!
During preparation, steam is given o. Take care to avoid
scalds.
1. When making cappuccino, prepare the coee in a large
cup;
2. Fill a container (preferably with a handle to avoid burns)
with about 100 grams of milk for each cappuccino to be
made. In choosing the size of the container, bear in mind
1 espresso 1 long coee
2 long coees2 espresso
background
12
13
LOW HIGH
3. Press the button to conrm the selection. The
lights go o.
Tips for a hotter coee
For a hotter coee, before delivery you are recommended to:
• rinse the appliance through by pressing the
button. Hot water ows out of the coee spouts and
heats the internal circuit of the machine so that the coee
delivered will be hotter.
• warm the cups with hot water (using the hot water
function);
• setahottercoeetemperature(seesection“Settingthe
temperature”).
Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and damage it.
1. Fill the container with coee beans (g. 9).
2. Place under the coee spouts:
- 1 cup if you want one coee (g. 10);
- 2 cups if you want 2 coees (g. 11).
3. Lower the spouts as near as possible to the cup. This makes
a creamier coee (g. 12).
4. Press the button corresponding to the number of coees
required
5. Preparation begins and the light corresponding to the
selected button ashes on the control panel.
Once the coee has been made, the appliance is ready for use
again.
Please note :
• Whilethecoeemakerismakingcoee,deliverycanbe
interrupted at any moment by pressing one of the coee
buttons.
• Attheendofdelivery,toincreasethequantityofcoee
in the cup, just press (within 3 seconds) one of the coee
buttons.
Please note :
For hotter coee, see the section “Tips for a hotter coee”.
Important!
• Ifthecoeeisdelivereda dropatatime, toothin and
not creamy enough or too cold, read the tips in the
“Troubleshooting” section on page 19.
• Lightsmaybedisplayedonthecontrolpanelduringuse.
Their meaning is given in the section “Explanation of the
lights” on page 18.
Making coee using pre-ground coee
Important!
• Neverplacecoeebeansinthepre-groundcoeefunnel
as this could damage the appliance.
• Neveraddpre-groundcoeewhenthemachineisoorit
could spread through the inside of the machine and dirty
it. This could damage the appliance.
• Never use more than 1 level
measure or it could dirty the
inside of the coee maker or
block the funnel.
Please note :
When using pre-ground coee, you can only make one cup of
coee at a time.
1. Make sure the appliance is on.
2. Turn the coee taste selection dial anticlockwise as far as
it will go to the position (g. 18).
3. Make sure the funnel is not blocked, then add one level
measure of pre-ground coee (g. 19).
4. Place a cup under the coee spouts.
5. Press the 1 cup coee button ( or ).
6. Preparation begins.
MAKING CAPUCCINO
Danger of burns!
During preparation, steam is given o. Take care to avoid
scalds.
1. When making cappuccino, prepare the coee in a large
cup;
2. Fill a container (preferably with a handle to avoid burns)
with about 100 grams of milk for each cappuccino to be
made. In choosing the size of the container, bear in mind
that the milk doubles or triples in volume.
Please note :
For a richer denser froth, use skimmed or partially
skimmed milk at refrigerator temperature (about 5°C).
To avoid milk with poor froth or large bubbles, always
clean the cappuccino maker as described in the section
“Cleaning the cappuccino maker after use”.
3. Press the button. The light ashes.
4. Immerse the cappuccino maker in the milk container (g.
20).
5. After a few seconds, when the light ashes, turn
the steam dial to the I position (g. 5). Steam is delivered
from the cappuccino maker, giving the milk a creamy
frothy appearance and making it more voluminous.
6. To obtain a creamier froth, rotate the container with slow
upward movements. You should not deliver steam for
more than 3 minutes at a time.
7. When you have obtained the required froth, stop steam
delivery by turning the steam dial back to the 0 position.
Danger of burns!
Stop steam delivery before removing the container with
the frothed milk to avoid burns caused by splashes of
boiling milk.
8. Add the milk froth to the coee prepared previously.
The cappuccino is ready. Sweeten to taste and, if desired,
sprinkle the froth with a little cocoa powder.
Cleaning the cappuccino maker after use
Clean the cappuccino maker after use to avoid the build-up of
milk residues or blockages.
1. Place a container under the cappuccino maker and deliver
a little water for a few seconds by rotating the steam dial
to the I position (g. 5).
Then turn the steam dial to the 0 position to stop the ow
of hot water.
2. Wait a few minutes for the cappuccino maker to cool
down. Grip the handle of the cappuccino maker tube
rmly in one hand and with the other rotate the
cappuccino maker anticlockwise (g. 16), then remove by
pulling downwards.
3. Also remove the steam nozzle by pulling it downwards
(g. 17).
4. Make sure the two holes shown by the arrow in g. 18 are
not blocked. If necessary, clean with a pin.
5. Wash all parts of the cappuccino maker thoroughly with a
sponge and warm water.
6. Replace the nozzle and put the cappuccino maker back
on the nozzle, pushing it and turning it upwards until it
is attached.
background
14
15
necessary.
Important!
When removing the drip tray, the grounds container must be
emptied, even if it contains few grounds.
If this is not done, when you make the next coees, the
grounds container may ll up more than expected and clog the
machine.
Cleaning the drip tray and condensate tray
Important!
If the drip tray is not emptied regularly, the water could
overow from the edge and seep inside or around the coee
maker. This could damage the machine, the surface it rests on
or the surrounding area.
The drip tray is tted with a level indicator (red) showing the
level of water it contains (g. 25).
Before the indicator protrudes from the cup tray, the drip tray
must be emptied and cleaned.
To remove the drip tray:
1. Remove the drip tray and the grounds container (g. 24);
2. Empty the drip tray and grounds container and wash
them;
3. Check the condensate tray and empty if necessary.
4. Replace the drip tray and grounds container.
Cleaning the inside of the coee maker
Danger of electric shock!
Before cleaning internal parts, the machine must be turned
o (see “Turning o”) and unplugged from the mains power
supply.Neverimmersethecoeemakerinwater.
1. Check regularly (about once a month) that the inside of
the appliance (accessible after removing the drip tray)
is not dirty. If necessary, remove coee deposits with a
sponge.
2. Remove the residues with a vacuum cleaner (g. 26).
Cleaning the water tank
Clean the water tank (A9) regularly (about once a month) with
a damp cloth and a little mild washing up liquid.
Cleaning the coee spouts
1. Clean the coee spouts with a sponge or cloth (g. 27).
2. Check the holes in the coee spout are not blocked.
If necessary, remove coee deposits with a toothpick (g.
28).
HEATING WATER
Danger of burns!
Never leave the machine unsupervised while delivering hot
water. Stop delivery of hot water as described below when the
cup is full. The hot water spout becomes hot while water is
being delivered and must be handled by the handle only.
1. possible to avoid splashes.
2. Turn the steam dial to the I position. Delivery begins.
3. Stop by turning the steam dial to the 0 position.
Please note :
If “Energy Saving” mode is active, you may have to wait a few
seconds before the hot water is delivered.
CLEANING
Cleaning the coee maker
The following parts of the machine must be cleaned regularly:
- coee grounds container (A13),
- drip tray (A17) and condensate tray (A14),
- water tank (A9),
- coee spouts (A12),
- pre-ground coee funnel (A6),
- inside of the machine (accessible after opening the infuser
door (A10))
- infuser (A11).
Important!
• Do not use solvents, abrasive detergents or alcohol to
clean the coee maker.
With De’Longhi superautomatic coee makers, you need
not use chemical products to clean the machine.
The descaler recommended by De’Longhi is made from
natural and completely biodegradable substances.
• Noneofthecomponentscanbewashedinadishwasher.
• Donotusemetalobjectstoremoveencrustationsorcoee
deposits as they could scratch metal or plastic surfaces.
Cleaning the coee grounds container
When the light ashes, the coee grounds container
must be emptied and cleaned.
Unless you clean the grounds container, the light will continue
to ash and the appliance cannot be used to make coee.
To clean (with the machine on):
• Removethedriptray(g.24),emptyandclean.
• Empty the grounds container and clean thoroughly to
remove all residues left on the bottom.
• Also check the condensate tray (red) and empty if
Cleaning the pre-ground coee funnel
Check regularly (about once a month ) that the pre-ground
coee funnel is not blocked. If necessary, remove coee
deposits.
Cleaning the infuser
The infuser (A11) must be cleaned at least once a month.
Important!
The infuser may not be extracted when the machine is on.
1. Make sure the machine is correctly turned o (see “Turning
the appliance o” on page 10).
2. Remove the water tank.
3. Open the infuser door (g. 29) on the right side.
4. Press the two red release buttons inwards and at the same
time pull the infuser outwards (g. 30).
Important!
Clean the infuser without using washing up liquid as it
could be damaged.
5. Soak the infuser in water for about 5 minutes, then rinse
under the tap.
6. Clean coee residues from the support where the infuser
rests.
7. After cleaning, replace the infuser by sliding it onto the
internal support, then push the PUSH symbol fully in until
it clicks into place.
Please note :
Iftheinfuserisdiculttoinsert,beforeinsertion,adaptitto
the right size by pressing the two levers shown in the gure.
8. Once inserted, make sure the two red buttons have
snapped out.
background
14
15
necessary.
Important!
When removing the drip tray, the grounds container must be
emptied, even if it contains few grounds.
If this is not done, when you make the next coees, the
grounds container may ll up more than expected and clog the
machine.
Cleaning the drip tray and condensate tray
Important!
If the drip tray is not emptied regularly, the water could
overow from the edge and seep inside or around the coee
maker. This could damage the machine, the surface it rests on
or the surrounding area.
The drip tray is tted with a level indicator (red) showing the
level of water it contains (g. 25).
Before the indicator protrudes from the cup tray, the drip tray
must be emptied and cleaned.
To remove the drip tray:
1. Remove the drip tray and the grounds container (g. 24);
2. Empty the drip tray and grounds container and wash
them;
3. Check the condensate tray and empty if necessary.
4. Replace the drip tray and grounds container.
Cleaning the inside of the coee maker
Danger of electric shock!
Before cleaning internal parts, the machine must be turned
o (see “Turning o”) and unplugged from the mains power
supply.Neverimmersethecoeemakerinwater.
1. Check regularly (about once a month) that the inside of
the appliance (accessible after removing the drip tray)
is not dirty. If necessary, remove coee deposits with a
sponge.
2. Remove the residues with a vacuum cleaner (g. 26).
Cleaning the water tank
Clean the water tank (A9) regularly (about once a month) with
a damp cloth and a little mild washing up liquid.
Cleaning the coee spouts
1. Clean the coee spouts with a sponge or cloth (g. 27).
2. Check the holes in the coee spout are not blocked.
If necessary, remove coee deposits with a toothpick (g.
28).
Cleaning the pre-ground coee funnel
Check regularly (about once a month ) that the pre-ground
coee funnel is not blocked. If necessary, remove coee
deposits.
Cleaning the infuser
The infuser (A11) must be cleaned at least once a month.
Important!
The infuser may not be extracted when the machine is on.
1. Make sure the machine is correctly turned o (see “Turning
the appliance o” on page 10).
2. Remove the water tank.
3. Open the infuser door (g. 29) on the right side.
4. Press the two red release buttons inwards and at the same
time pull the infuser outwards (g. 30).
Important!
Clean the infuser without using washing up liquid as it
could be damaged.
5. Soak the infuser in water for about 5 minutes, then rinse
under the tap.
6. Clean coee residues from the support where the infuser
rests.
7. After cleaning, replace the infuser by sliding it onto the
internal support, then push the PUSH symbol fully in until
it clicks into place.
Please note :
Iftheinfuserisdiculttoinsert,beforeinsertion,adaptitto
the right size by pressing the two levers shown in the gure.
8. Once inserted, make sure the two red buttons have
snapped out.
PUSH
8. Close the infuser door.
9. Replace the water tank.
DESCALE
Descale the appliance when the light on the control
panel ashes (g. 31).
Important!
Descaler contains acids which may irritate the skin and eyes.
It is vital to respect the manufacturer’s safety warnings given on
the descaler pack and the warnings relating to the procedure to
follow in the event of contact with the skin and eyes.
Please note :
Use De’Longhi descaler only.
Under no circumstances should you use sulphamic or acetic
based descalers. Their use invalidates the guarantee.
Failure to descale the appliance as described also invalidates
the guarantee.
1. Turn the appliance on and wait until it is ready for use.
2. Empty the water tank (A12) and remove the softener
lter, if present.
3. Pour the descaler into the tank up to the level A
(corresponding to a 100 ml pack) marked on the back of
the tank (g. 32A), then add water (1l) up to level B (g.
32B).
Place an empty container with a minimum capacity of 1.5
litres under the cappuccino maker .
4. Wait for the coee lights to come on steadily.
Important! Danger of burns
Hot water containing acid ows from the cappuccino maker.
Avoid contact with splashes of water.
5. Press the button and hold it down for at least 5
seconds to conrm that you have added the solution
and begin the descaling procedure. The light in the
button remains on steadily to indicate that the descaling
programme has begun. The light ashes telling you
to turn the steam dial to the l position.
6. Turn the steam dial a half turn anticlockwise to the I po-
sition. The descaler solution ows out of the cappuccino
maker into the underlying container.
background
16
17
The descale programme automatically performs a series
of rinses and pauses to remove the limescale.
It is normal for several minutes of inactivity to elapse
between rinses.
After about 30 minutes, the water tank is empty and the
and lights ash. Turn the steam dial clockwise as far as it
will go to the 0 position.
The appliance is now ready for rinsing through with clean
water.
7. Empty the container used to collect the descaler solution
and replace it empty under the cappuccino maker.
8. Remove the water tank, empty, rinse under running
water, ll with clean water and replace. The light
ashes.
9. Turn the steam dial anticlockwise to the I position (g. 5).
Hot water comes out of the spout.
10. When the water tank is completely empty, the light
ashes.
11. Turn the dial to the 0 position. The light goes
o.
Fill the water tank again and the machine is ready for use.
SETTING WATER HARDNESS
Descaling is necessary after a period of operation established
according to the water hardness set.
The machine is factory set for a hardness value of 4.
The machine can also be programmed according to the
hardness of the mains water in the various regions so that the
machine needs to be descaled less often.
Measuring water hardness
1. Remove the “TOTAL HARDNESS TEST” indicator paper
attached to this manual from its pack.
2. Immerse the paper completely in a glass of water for one
second.
3. Remove the paper from the water and shake lightly.
After about a minute, 1, 2, 3, or 4 red squares form,
depending on the hardness of the water. Each square
corresponds to one level.
Level 1
Level 2
Level3
Level 4
Set water hardness
1. Make sure the appliance is o (but connected to the
mains electricity supply and with the main switch in the I
position);
2. Press the button and hold it down for at least
6 seconds. The and lights come on
together;
3. Press the button (on the left of the dial) to set the
actual water hardness as measured by the indicator
paper.
Level Level Level Level
1 234
4. Press the button (on the right of the dial) to
conrm the selection.
The machine is now reprogrammed with the new water
hardness setting.
TECHNICAL SPECIFICATION
Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power: 1450W
Pressure: 15 bars
Water tank capacity: 1.8 litres max.
Size LxHxD: 238x340x430 mm
Cable length: 1.15 m
Weight: 9.1 kg
Coee beans container capacity: 250 g max.
The appliance complies with the following EC
directives:
• Stand-byDirectiveno.1275/2008;
• Low Voltage Directive 2006/95/EC and subsequent
amendments;
• EMC Directive 2004/108/EC and subsequent
amendments
• Materialsandaccessoriescomingintocontactwithfood
conform to EEC regulation 1935/2004.
DISPOSAL
Important information for correct disposal of the
product in accordance with EC Directive 2002/96/
EC.
At the end of its working life, the product must not
be disposed of as urban waste. It must be taken to
a special local authority dierentiated waste collection centre
or to a dealer providing this service. Disposing of a household
appliance separately avoids possible negative consequences
for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered
to obtain signicant savings in energy and resources.As a
reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled
dustbin.
background
16
17
Set water hardness
1. Make sure the appliance is o (but connected to the
mains electricity supply and with the main switch in the I
position);
2. Press the button and hold it down for at least
6 seconds. The and lights come on
together;
3. Press the button (on the left of the dial) to set the
actual water hardness as measured by the indicator
paper.
Level Level Level Level
4. Press the button (on the right of the dial) to
conrm the selection.
The machine is now reprogrammed with the new water
hardness setting.
TECHNICAL SPECIFICATION
Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power: 1450W
Pressure: 15 bars
Water tank capacity: 1.8 litres max.
Size LxHxD: 238x340x430 mm
Cable length: 1.15 m
Weight: 9.1 kg
Coee beans container capacity: 250 g max.
The appliance complies with the following EC
directives:
• Stand-byDirectiveno.1275/2008;
• Low Voltage Directive 2006/95/EC and subsequent
amendments;
• EMC Directive 2004/108/EC and subsequent
amendments
• Materialsandaccessoriescomingintocontactwithfood
conform to EEC regulation 1935/2004.
DISPOSAL
Important information for correct disposal of the
product in accordance with EC Directive 2002/96/
EC.
At the end of its working life, the product must not
be disposed of as urban waste. It must be taken to
a special local authority dierentiated waste collection centre
or to a dealer providing this service. Disposing of a household
appliance separately avoids possible negative consequences
for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered
to obtain signicant savings in energy and resources.As a
reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled
dustbin.
background
18
19
LIGHT POSSIBLE CAUSE REMEDY
LAMPEGGIANTE
The infuser has not been replaced after
cleaning.
Insert the infuser as described in the section “Cleaning
the infuser”.
The inside of the appliance is very dirty. Clean the inside of the appliance thoroughly, as described
in the section “Cleaning and maintenance”.
If the message is still displayed after cleaning, contact a
customer services.
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
PROBLEM POSSIBLE CAUSE REMEDY
The coee is not hot
The cups were not preheated. Warm the cups by rinsing them with hot water (Please note
you can use the hot water or rinse function).
The infuser has cooled down because 2/3 minutes have
elapsed since the last coee was made.
Before making the coee, warm the infuser by pressing the
rinse button .
The coee is thin or not
creamy enough.
The coee is ground too coarsely. Turn the grinding adjustment dial one click anticlockwise
while the coee mill is in operation (g. 8).
Continue one click at a time until coee delivery is
satisfactory. The eect is only visible after delivering two
coees (see the section: “Adjusting the coee mill” on
page 13).
The coee is unsuitable. Use pre-ground coee for espresso coee makers.
The coee is delivered too
slowly or a drop at a time
The coee is ground too nely. Turn the grinding adjustment dial one click clockwise while
the coee mill is in operation (g. 10). Continue one click at
a time until coee delivery is satisfactory. The eect is only
visible after delivering 2 coees (see the section: “Adjusting
the coee mill” on page 13).
Coee does not come out of
one of the spouts
The spouts are blocked. Clean the spouts with a toothpick.
The frothed milk has large
bubbles
The milk is not cold enough or is not semi-skimmed. You should ideally use skimmed or semi-skimmed milk at
refrigerator temperature (about 5°C).
If the result is still disappointing, try another brand of milk.
The milk is not frothed
Cappuccino maker dirty. Clean as described in the section "Cleaning the cappuccino
maker after use" on page 13.
Steam delivery stops during
use
A safety device stops steam delivery after 3 minutes. Wait a few minutes, then activate the steam function
again.
The appliance does not
come on
It is not plugged into the mains socket. Plug into the mains socket.
The main switch (A8) is not turned on. Place the main switch in the I position (g. 1).
EXPLANATION OF LIGHTS
LIGHT POSSIBLE CAUSE REMEDY
FLASHING
Insucientwaterinthetank. Fill the tank with water and insert it correctly, pushing it as
far as it will go until it clicks into place.
The tank is not correctly in place. Insert the tank correctly and press as far as it will go.
FLASHING
The grounds container (A13) is full. Empty the grounds container and drip tray, clean and
replace. Important: when removing the drip tray, the
grounds container MUST be emptied, even if it contains
few grounds. If this is not done, when you make the next
coees, the grounds container may ll up more than
expected and clog the machine.
After cleaning, the grounds container has
not been replaced.
Remove the drip tray and insert the grounds container.
FLASHING
The grinding is too ne and the coee is
delivered too slowly or not at all.
Repeat coee delivery and turn the grinding adjustment
dial (g. 10) one click clockwise towards “7” while the
coee mill is in operation. If after making at least 2 coees
delivery is still too slow, repeat the correction procedure,
turning the grinding adjustment dial another click until
delivery is correct (see the section: Adjusting the coee mill
on page 12). If the problem persists, turn the steam dial to
the I position and deliver water from the cappuccino maker.
FLASHING
The "pre-ground coee" function has been
selected without placing any pre-ground
coee in the funnel.
Place pre-ground coee in the funnel or deselect the
"pre-ground" function.
FLASHING
The machine must be descaled. The descaling procedure described in the section
“Descaling” needs to be performed as soon as possible.
FLASHING
Too much coee has been used. Select a milder taste or reduce the quantity of pre-ground
coee then make the coee again.
FLASHING
The coee beans have run out. Fill the beans container
The pre-ground coee funnel is clogged. Empty the funnel with the help of a knife as described in
the section "Cleaning the pre-ground coee funnel".
background
18
19
LIGHT POSSIBLE CAUSE REMEDY
LAMPEGGIANTE
The infuser has not been replaced after
cleaning.
Insert the infuser as described in the section “Cleaning
the infuser”.
The inside of the appliance is very dirty. Clean the inside of the appliance thoroughly, as described
in the section “Cleaning and maintenance”.
If the message is still displayed after cleaning, contact a
customer services.
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
PROBLEM POSSIBLE CAUSE REMEDY
The coee is not hot
The cups were not preheated. Warm the cups by rinsing them with hot water (Please note
you can use the hot water or rinse function).
The infuser has cooled down because 2/3 minutes have
elapsed since the last coee was made.
Before making the coee, warm the infuser by pressing the
rinse button .
The coee is thin or not
creamy enough.
The coee is ground too coarsely. Turn the grinding adjustment dial one click anticlockwise
while the coee mill is in operation (g. 8).
Continue one click at a time until coee delivery is
satisfactory. The eect is only visible after delivering two
coees (see the section: “Adjusting the coee mill” on
page 13).
The coee is unsuitable. Use pre-ground coee for espresso coee makers.
The coee is delivered too
slowly or a drop at a time
The coee is ground too nely. Turn the grinding adjustment dial one click clockwise while
the coee mill is in operation (g. 10). Continue one click at
a time until coee delivery is satisfactory. The eect is only
visible after delivering 2 coees (see the section: “Adjusting
the coee mill” on page 13).
Coee does not come out of
one of the spouts
The spouts are blocked. Clean the spouts with a toothpick.
The frothed milk has large
bubbles
The milk is not cold enough or is not semi-skimmed. You should ideally use skimmed or semi-skimmed milk at
refrigerator temperature (about 5°C).
If the result is still disappointing, try another brand of milk.
The milk is not frothed
Cappuccino maker dirty. Clean as described in the section "Cleaning the cappuccino
maker after use" on page 13.
Steam delivery stops during
use
A safety device stops steam delivery after 3 minutes. Wait a few minutes, then activate the steam function
again.
The appliance does not
come on
It is not plugged into the mains socket. Plug into the mains socket.
The main switch (A8) is not turned on. Place the main switch in the I position (g. 1).
EXPLANATION OF LIGHTS
LIGHT POSSIBLE CAUSE REMEDY
FLASHING
Insucientwaterinthetank. Fill the tank with water and insert it correctly, pushing it as
far as it will go until it clicks into place.
The tank is not correctly in place. Insert the tank correctly and press as far as it will go.
FLASHING
The grounds container (A13) is full. Empty the grounds container and drip tray, clean and
replace. Important: when removing the drip tray, the
grounds container MUST be emptied, even if it contains
few grounds. If this is not done, when you make the next
coees, the grounds container may ll up more than
expected and clog the machine.
After cleaning, the grounds container has
not been replaced.
Remove the drip tray and insert the grounds container.
FLASHING
The grinding is too ne and the coee is
delivered too slowly or not at all.
Repeat coee delivery and turn the grinding adjustment
dial (g. 10) one click clockwise towards “7” while the
coee mill is in operation. If after making at least 2 coees
delivery is still too slow, repeat the correction procedure,
turning the grinding adjustment dial another click until
delivery is correct (see the section: Adjusting the coee mill
on page 12). If the problem persists, turn the steam dial to
the I position and deliver water from the cappuccino maker.
FLASHING
The "pre-ground coee" function has been
selected without placing any pre-ground
coee in the funnel.
Place pre-ground coee in the funnel or deselect the
"pre-ground" function.
FLASHING
The machine must be descaled. The descaling procedure described in the section
“Descaling” needs to be performed as soon as possible.
FLASHING
Too much coee has been used. Select a milder taste or reduce the quantity of pre-ground
coee then make the coee again.
FLASHING
The coee beans have run out. Fill the beans container
The pre-ground coee funnel is clogged. Empty the funnel with the help of a knife as described in
the section "Cleaning the pre-ground coee funnel".

Specifications

Indexed Terms: Automatic Coffee Machine

Delonghi ECAM22110BPK Questions and Answers

Find answers or ask new question.
See other models: ECAM22110SBPK ECAM29031SBPK ECAM29083TBPK ECAM35055SBPK ECAM37095TPK
Questions and Answers