Loading ...
Loading ...
Loading ...
Using the earphones
MOMENTUM True Wireless | 13
1. Open the charging case by overcoming a slight magnetic resis-
tance and insert the left earbud into the left charging compart-
ment and the right earbud into the right charging compartment.
The earbuds are magnetically pulled into the charging compart-
ments.
2. Connect the USB-C connector of the USB cable to the USB-C
socket of the charging case.
3. Connect the USB-A connector to a corresponding socket of a USB
power source (to be ordered separately). Make sure that the USB
power source is connected to the power supply system.
The rechargeable batteries of the earphones and the charging
case are being charged.
If no earphones are inserted into the charging case, only the
rechargeable battery of the charging case is being charged.
The LED of the charging case displays the charge status:
Connecting the earphones to a Bluetooth
device
To be able to use the Bluetooth wireless connection, you must regis-
ter both devices (earphones and e.g. smartphone) via the device set-
tings of your smartphone. This process is called pairing.
If operation differs from the steps mentioned, also refer to the
instruction manual of the Bluetooth device you are using.
Information on the Bluetooth wireless
connection
The earphones are compatible with Bluetooth 5.0.
If your audio source supports one of the following high-resolution
audio encoding methods, music is automatically played in high audio
quality: aptX, aptX® LL or AAC. Otherwise the headphones will play
your music in normal audio quality (SBC).
LED
Charging case WITH
earbuds inserted
Charging case
WITHOUT earbuds
inserted
yellow
yellow
... earbuds and
charging case are
being charged
... charging case is
being charged
lights up
green
... earbuds and
charging case are
fully charged
... charging case is
fully charged
flashes
red
... a charging error/
battery error has
been detected in at
least one earbud (>
26)
... a charging error/
battery error has
been detected in the
charging case (> 26)
If you switch the earphones on for the first time after initial
charging, they automatically switch to pairing mode.
Loading ...
Loading ...
Loading ...