Loading ...
Loading ...
Loading ...
BEFORE YOU START TO ASSEMBLE THE GRASS CATCHER
Some tractor models may need minor modifications before you can mount the grass catcher to the tractor.
Look carefully at the drawbar on your tractor and compare to the illustrations below. If your drawbar looks
like STYLE "A" (has the upper corner ribs), your tractor is ready - proceed with the grass catcher assembly.
If your drawbar looks like STYLE "B" (does not have the upper corner ribs), go to the PREPARATION
section in this manual.
TRACTOR DRAWBAR
STYLE "A" " ,o_
UPPER
CORNER
RIBS
J
TRACTOR DRAWBAR
STYLE"B"
PARTS IDENTIFICATION
COVER
UPPER CHUTE
FULL
BAGGER
GRASS
CATCHER
CONTAINERS
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the
tractor_in the operator's position. • .
(1) 3/8" Wrench (1)_rive Ratchet
THESE ARE THE TOOLS YOU WILL NEED'TO AS- (1) 1/2" Wrench (1) 3" or longer Extension
SEMBLE YOUR GRASS CATCHER: (2) 9/16" Wrenches (1) Short Handle
(1) 1/2" Socket Phillips Screwdriver
&
CAUTION: BEFORE ASSEMBLING GRASS CATCHERTOTRACTOR:
• Depress clutch/brake pedal fully and set parking brake.
i Place gearshift/motion control lever in "NEUTRAL" position.
Place attachment clutch in "DISENGAGED" position.
Turn ignition key "OFF" and remove key.
• Make sure the blade and all moving parts have completely stopped.
• Disconnect spark plug wire from spark plug and place wire where itcannot come in contact
with plug.
7
Loading ...
Loading ...
Loading ...