Loading ...
Loading ...
Loading ...
&
CAUTION: BEFORE PROCEEDING WITH PREPARATION OFTRACTOR:
Depress clutch/brake pedal fully and set parking brake.
Place gearshift/motion control lever in "NEUTRAL" position.
Place attachment clutch in "DISENGAGED" position.
• Turn ignition key "OFF" and remove key.
• Make sure the blade and all moving parts have completely stopped.
• Disconnect spark plug wire from spark plug and place wire where it cannot come in contact
with plug.
NOTE
ON SOME MODEL TRACTORS, MINOR MODIFICATIONS MAY BE NECESSARY TO MOUNT YOUR NEW GRASS
CATCHER. NOT ALL MODEL TRACTORS WILL NEED THE FOLLOWING MODIFICATIONS. CHECK EACH STEP
CAREFULLY TO DETERMINE IF MODIFICATION IS REQUIRED. ONCE YOUR MODEL TRACTOR CONFORMS TO
THIS SECTION PROCEED TO ASSEMBLY.
To Prepare your Grass Catcher you may need:
(1) DrillMotor
(1) 7/16" Drill Bit
DRILL SUPPORTTUBE MOUNTING HOLES IN DRAWBAR
(See Template at Left)
On some model tractors, two 7/16" holes must be drilled in leftside of the drawbar for mounting the support tube.
NOTE: To ease in drilling7/16" holes, it may be necessary to drillsmaller pilot holes at the locations indicated.
17
Loading ...
Loading ...
Loading ...