Loading ...
Loading ...
Loading ...
BRT5008 Page
16
Assembly STEP 9
Hardware Required
THE ASSEMBLY PROCESS IS NOW COMPLETE.
However, for your own safety, please make sure to read this entire Owner’s Manual which
includes safety instructions and warnings, as well as any safety/warning labels axed to the
product before use. For your safety , please visually and functionally inspect and test the unit
after assembly is complete.
Remove Bolts (#46) and Washers (#42) that are
pre-assembled on the two Cushions (#15) and set them
aside as they will be used in a later process.
Attach one Cushion (#15) to the Seat Cushion Tube (#16).
Secure with four Washers (#42) and four Bolts (#46).
Attach another Cushion (#15) to the Backrest Cushion Tube
(#68). Secure with four Washers (#42) and four Bolts (#46).
#42
Washer
(M8)
[8 pieces]
#46
Bolt (M8x16 mm)
[8 pieces]
WARNING!
Do not remove the seat assembly
for any reason after you have
installed it.
Exercising on this unit without
the seat assembly can result in
SERIOUS INJURY.
Ensure the seat is locked in place
by tightening the two knobs prior
to use.
Loading ...
Loading ...
Loading ...