Loading ...
Loading ...
Loading ...
- 6 -
Explanation of the vacuum pump's components
Steps for setting up the vacuum pump
Following these steps will help you set up your vacuum pump correctly and
ensure its safe and efficient operation.
Before use, remove the oil filling port/oil gas separator and fill it with
the recommended vacuum pump oil. Check the oil level before use
to ensure it's not lower than the oil-level line. Do not run the pump with
a low oil level.
Connect the container to be pumped to the gas inlet using a short,
sealed hose that's free of dust, dirt, and heavy condensation. Check
for leaks before operating the pump.
If your vacuum pump comes with an exhaust cap, remove it.
Plug in the power supply and turn on the switch.
After use, unplug the vacuum pump, remove the connecting hoses,
and cover the exhaust cap (if it has one) to prevent oil spills. Also,
cover the oil plug to keep the oil clean and prevent dirt from entering
the vacuum pump.
Loading ...
Loading ...
Loading ...