Loading ...
Loading ...
Loading ...
Theprogressbarisavisualpictureoftheestimatedrunningtime
ofacookingcycle.Itwillappearduringallcookcyclesexcept
WarmHold.Thelinesineachofthesegmentswilllightfromleft
torightasthetimenearstheend.Whenall15lines(allthree
segments)arelit,thecookingcycleiscompleted.
Themicrowaveovenispresetwithshortcutnumbercodes.A
numbercodeincludesoneormoreofthefollowing:cooking
power,cooktimeandfoodquantityorweight.Seethecode
chartsinthe"Cooking"and"Reheating"sectionsforadditional
information.
TheJETSTARTTM control will start any function. If not touched
within 5 seconds after touching a pad, "START?" will appear on
the display as a reminder. If not touched within 5 minutes after
touching a pad, the display will return to the time of day mode
and the programmed function will be canceled.
If cooking is interrupted, touching the JET START TM control will
resume the preset cycle.
The JET START TM control, touched by itself, will automatically
start the microwave oven for a 30 second cook time at 100%
cooking power.
The JET START TM control, touched while the microwave oven is
operating in any cook function, will add 30 seconds of cook time
at the cook power currently in use. Each touch of the JET
STARTTM console pad will add 30 additional seconds of cook
time.
The five JET COOK TM controls share function with the numerical
pads 1-5. When one of the 5 JET COOK TM controls is touched
(while no function is operating), the oven will begin cooking at
high power for 1-5 minutes, depending on which pad is touched.
After cooking begins, the JET COOK TM controls return to their
normal numerical pad function.
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the microwave oven and Timer are off.
1. Touch CLOCK.
2. Touch the number pads to set the time of day.
3. Touch CLOCK or JET START.
To Remove:
1. Touch CLOCK.
2. Touch 0.
3. Touch CLOCK.
The time will disappear and ":" will appear on the display.
Tones are audible signals, indicating the following:
One tone
• Valid pad touch (short tone)
• End of Timer countdown (long tone)
Two tones
• Reminder, repeat each minute after the end-of-cycle tones
• Function has been entered or exited
Three tones
• Invalid pad touch
Four tones
• End-of-cycle
All Tones
All of the preceding tones are preset on. All except the end of
Timer countdown can be turned off.
To Turn Off/On: Touch and hold the number pad [2] for five
seconds until two tones sound. Repeat to turn tones back on.
Valid Pad Touch Tones
The valid pad touch tones are preset on, but can be turned off.
To Turn Off/On: Touch and hold the number pad [1] for five
seconds or until two tones sound. Repeat to turn tones back on.
The OFF/CANCEL pad stops most functions except for the
Timer, Control Lock and Demo Learning Mode.
The microwave oven will also turn off when the door is opened.
Close the door and touch JET START to resume the cycle.
The Timer can be set in minutes and seconds, up to 99 minutes
99 seconds and counts down the set time. The Timer does not
start or stop the microwave oven.
When the Timer is in use, the microwave oven can also operate.
To see the time countdown for five seconds when the microwave
oven is in use, touch TIMER SET/OFF.
To Set:
1. Touch TIMER SET/OFF.
If no action is taken after one minute, the display will return to
the time of day mode.
2. Touch the number pads to set the length of time.
Loading ...
Loading ...
Loading ...