Loading ...
Loading ...
Loading ...
Mobile Air-conditioner
-
35
-
WATER DRAINAGE
When in cooling or dehumidifrying mode, the dew water will drain into the tank, When the tank gets full, the
indicator will flash, and the buzzer will sound eight times, LCD window shows error code “E4” at the same time the
unit will switch off.
As the step shown in the figure below. Take out the water tank, pour out the water inside the tank, then push it back
to its original position.
4.CAUTION
1. When in cooling or dehumidifying mode, do not take out the water tank, or the buzzer will sound and the unit will
switch off.
2. If you want to take out the tank before it is full of water, please stop the machine first, and wait for 3 minutes to
prevent the dew water from spilling into the unit.
3. There is a plastic pipe inside where the tank is placed. Do not remove the stopper while the unit is working because
the water is used for cooling the copper tube.
4. Put in the plug of drainage in water drainage method.
5.METHOD OF CONTINUOUS DRAINAGE
1. Push down the drainage and make it inclined, pull out the plug of drainage.
2. Don’t push down the drainage except for this application, otherwise it will leak.
Don’t make the continuous drainage clogged.
3. Hold the drainage, then insert the pipe into continuous drainage hole.
4. Drainage
- When draining out water, don’t press the drainage too forcefully.
- When draining out water, don’t make bend the pipe.
Step1
Step2
Step3
Loading ...
Loading ...
Loading ...