Loading ...
Loading ...
Loading ...
MAIN
ENANCE
ELECTRICAL
CONNECTION
Appliances which require electrical
power are equipped with a three-prong
grounding plug which must be plugged
directly into a properly grounded three-
hole 120 volt electrical outlet.
Always disconnect power to appli-
ance before servicing.
If an ungrounded, two-hole or other
type electrical outlet is encountered, IT
ISTHE PERSONAL RESPONSIBILITY
OF THE APPLIANCE OWNER TO
HAVE RECEPTACLE REPLACED
WITH A PROPERLY GROUNDED
THREE HOLE ELECTRICAL OUTLET.
The three-prong grounding plug is pro-
vided for protection against shock haz-
ards. DO NOT CUT OR REMOVE THE
THIRD GROUNDING PRONG FROM
THE POWER CORD PLUG.
HOW TO REMOVE
RANGE FOR CLEANING
AND SERVICING
When necessary, follow these proce-
dures to remove appliance for cleaning
or servicing:
.
2_
.
,
,
Shut-off gas supply to appliance.
Disconnect electrical supply to appli-
ance.
Disconnect gas supply tubing to ap-
pliance.
Slide range forward to disengage
range from the anti-tip bracket. (See
Installation Instructions for location of
bracket,)
Reverse procedure to reinstall. If gas
line has been disconnected, check
for gas leaks after reconnection. (See
Installation Instructions for gas leak
test method.)
BACKGUARD LIGHT
To turn on backguard light, press and
hold "cooktop" rocker switch, located on
backguard, until light turns on.
To replace fluorescent surface light:
Disconnect power to range. Grasp the
toptrim ofbackguard withthumbs under
front edge and pull outward while lifting
to release trim from catches at each
end.
Remove bulb and replace with an 18
watt fluorescent tube. Snap top trim
back into place, restore power, and re-
set clock.
OVEN LIGHT
To turn on oven light, press "oven"
rocker switch, located on backguard.
To replace oven light: Before replac-
ing light bulb, DISCONNECT POWER
TO RANGE. Be sure bulb iscool, Do not
toucha hot bulbwith a damp clothas the
bulb may break. Use a dry potholder
and carefully unscrew bulb cover and
bulb.
Replace with a 40 watt appliance bulb.
Reconnect power to range and reset
clock.
-13-
Loading ...
Loading ...
Loading ...