Loading ...
Loading ...
Loading ...
– 3
Place the suction hose of the injector
into the detergent can.
Operate the high-pressure cleaner in
the normal way.
Note:
If you are using a Servopress gun, set it to
full water quantity.
Pull the lever on the handgun.
Perform cleaning task. Observe the
separate operating instructions of the
high-pressure cleaner.
After operations, dip the filter in clear
water.
Start the device and rinse for 2 minutes.
Note:
If the system is not rinsed after use, conglu-
tination or increased wear may occur.
Remove injector.
Replace chemicals nozzle by high-
pressure nozzle.
or
Switch the multi-channel nozzle over to
high pressure.
No or insufficient detergent supply.
Injector is blocked.
Remove the injector and rinse with
warm water.
From now on, rinse the system with
clear water for 2 minutes after using de-
tergent.
Replace the high-pressure nozzle by
the included chemicals nozzle.
or
Switch multiple nozzle to position
"CHEM".
Use a shorter high-pressure hose.
If you are using a Servopress gun, set it
to full water quantity.
Water escapes at the detergent suction
hose.
Call Customer Service.
Dosing valve, for continuous regulation of
the detergent quantity without changing the
dosing cover.
Order no. 6.500-000.0
Operation
Operation with detergent
Operation without detergent
Troubleshooting
Accessories
8 EN
Loading ...
Loading ...
Loading ...