Loading ...
Loading ...
Loading ...
· The standby switch at the left hand side of the fire canopy must be first switch on.
· Press once the O/I button to turn on the appliance and fire effect. A red indicator light will appear to indicate that
the function is ON. Press the O/I button for 3 seconds this will operate the dimmer mode. There are 5 levels flame
brightness available.
· Press once the 1000W button for the low heat settings, a red indicator light will appear to indicate the function;
press twice to switch off the heat setting.
· Press once the 2000W button for the high heat settings, a red indicator light will appear to indicate the function;
press twice to switch off the heat setting.
· Press the DIMMER button for operate the dimmer mode. There are 5 levels flame brightness available.
· NOTE: The set temperature must be higher than the room temperature for the heat working.
·
Remote Operation
Flame brightness adjustment
· Press "DIMMER" button on the remote control, the flame brightness may change step by step with each press of
the button
Temperature setting
· Press "+" or "-" button on the remote control to set the temperature, which ranges from 15 to 30℃, and this is the
normally set temperature (the timer is off). The default set temperature is 20 ℃.
Loading ...
Loading ...
Loading ...