Loading ...
Loading ...
Loading ...
STEP 4
-----------------------------------------------------------------------------------
• Insert the Drip Shield (4) into the main grill. Rest the Drip Shield on the built-in ledge (on the inside right) of
the main grill that directs grease towards the grease bucket spout. Slide the Entire Piece to the left side,
and the two slots on the Drip Shield will fit into the rounded ledge above the fire pot. It will sit slightly at a
downward angle.
NOTE: If the Drip Shield is touching the base of the main body or the fire pot, it is installed incorrectly.
• Place the Sear Shutter (3) on top of the Drip Shield, covering the slotted openings. Ensure the raised tab is
on the left to easily adjust for direct or indirect flame when cooking. Both parts are lightly coated with oil to
avoid rusting when shipped.
NOTE: When the Sear Shutter is open, and direct flame is used while cooking, do not leave the grill
unattended for any period of time
ASSEMBLY INSTRUCTIONS
10
3
4
11
Loading ...
Loading ...
Loading ...