Loading ...
Loading ...
Loading ...
ImConnections
Caution
, Before connecting the speakers, remove the unit's power cable from the AC wall outlet.
, Ensure that the core wires of the speaker cable do not touch each other or come into contact with the
unit's metal areas. This may damage the unit or the speakers.
• Connect the speakers with the correct polarity.
1
Connect the speaker in Zone2 to the EXTRA SP terminals with
speaker cables.
The type of the speaker terminals varies depending on the model.
The unit (rear)
EXTRA SP terminals
t
3
Connect the playback devices (such as BD/DVD players and CD
players) in the main zone to the analog stereo input jacks with stereo
pin cables.
Only analog audio sources (including FM/AM radio), and USB and network
sources can be output to Zone2. To listen to the playback of an external device
in Zone2, you need to connect the device to the analog audio input jacks.
The unit (rear)
AV 5-6 jacks
AUDIO 1-2 jacks BD/DVD player
CD player
Connect the power cable to an AC wall outlet.
To operate the unit and external devices from Zone2
You can operate the unit and external devices from Zone2 using the supplied remote
control if you connect an infrared signal receiver/emitter to the unit's REMOTE IN/OUT
jacks. For details, refer to the Owner's Manual in the supplied CD-ROM
Left
(Rotate-type)
+ (red)
- (black)
Right
Speakers (Zone2)
(Push-type)
+ (red)
- (black)
Loading ...
Loading ...
Loading ...