Loading ...
Loading ...
Loading ...
iiiiii!!_iiii'!i
Cursor keys
ENTER
New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected
to the Internet, you can download the firmware via the network and
update it.
I+I®i®
• Do not operate the unit or disconnect the power cable or network cable during
firmware update. Firmware update takes about 20 minutes or more
(depending on your Internet connection speed).
• If the unit is connected to the wireless network via a wireless network adapter,
network update may not be possible depending on the condition of the
wireless connection. In this case, update the firmware using the USB memory
device (p.101).
• You can also update the firmware using the USB memory device from the
"ADVANCED SETUP" menu (p.101).
A firmware update is available if the following message is displayed
after ON SCREEN is pressed.
Read the on-screen description.
To start the firmware update, use the cursor keys to
select "START" and press ENTER.
The on-screen display turns off.
3 If "Update Success Please Power Of!!" appears on
the front display, press MAIN ZONE _ on the front
panel.
The firmware update is complete.
• Ifyou want to update the firmware later, select "CLOSE" in Step 2. '!" (exclamation
mark) appears at the upper right of the "Information" and "System" icons, and a
message will be displayed in the "System" screen (p.98). You can update the unit's
firmware by pressing ENTER in the "System" screen.
Information
icon
Message
System Icon
CONFIGURATIONS • Updating the unit's firmware via the network I En105
Loading ...
Loading ...
Loading ...