Loading ...
Loading ...
Loading ...
96 - USE 914779932/B
2. Select
PLATE WARMING .
3. Touch the START button to start the
Plate warming function.
The following can be set while the function is in
operation:
• the temperature (from 40°C to 80°C);
• the duration of the function ;
• one programmed function (only if a
duration different from the default one is set).
When finished, a buzzer sounds briefly, which
can be deactivated by touching any point of the
display or by opening the door.
STEAM HEAT
1. Place the food to be heated in a container.
2. Open the door.
3. Place the container on the rack in the
second shelf from the bottom.
4. Close the door.
5. Select
STEAM HEAT .
6. Touch the COOKING DURATION
button or the relevant value.
7. Scroll through the values and select the
required cooking duration.
8. Touch the START button to start the
reservoir filling procedure.
9. Proceed with reservoir filling as described
above.
10. Touch the START button to start the
steam heat function.
End of steam heat
At the end, "Function ended" displays and a
buzzer sounds briefly, which can be
deactivated by touching any point of the display
or by opening the door.
11. Touch the HOME button to quit the
function.
12. Proceed with draining the reservoir as
described above.
KEEP WARM
1. Select
KEEP WARM .
2. Touch the TEMPERATURE button or the
relevant value.
3. Scroll through the values and select the
required cooking temperature (from 60°C
to 100°C).
4. Touch the START button to start the
Keep warm function.
When finished, a buzzer sounds briefly, which
can be deactivated by touching any point of the
display or by opening the door.
STONE
1. Open the door.
2. Insert the PPR2 or STONE accessory in the
oven cavity (refer to the specific manual of
the accessory).
3. Close the door.
4. Select STONE .
5. Scroll through the values and select the
required cooking temperature (from 50°C
to 250°C).
Unless otherwise set, the Plate warming
function has a maximum duration of 12
hours and 59 minutes.
The function steam-heats food that has
already been cooked and stored in the
fridge.
The temperature of the steam heating
cannot be changed by the user.
This function allows you to keep pre-
cooked foods warm.
Useful for on stone cooking. For use
with the PPR2 or STONE accessory
sold separately.
Please refer to the instructions and
recommendations for use described in
the accessory documentation.
Loading ...
Loading ...
Loading ...