Loading ...
Loading ...
Loading ...
Setting Surface
ControMs
Surface Control Knob
OFF
\\
Griddle
Griddle
Reflection Observation Hole
The hole in the griddle cover should be
toward the backguard.
Make sure to locate the
griddle observation hole toward tile front
of tile range to observe the burner flame.
Do not use the griddle
cover over a lit burner or for cooking This
may damage the cover
Each burner lights automatically from an electric ignitor. Electric ignitors light
automatically each time a Surface Control knob isturned to the LITEposition.
To Operate the Surface Burner
1. Placecooking utensil on burner.
2. Pushin and turn the Surface Control knob to LITE.Note: All electronic ignitors
will click at the same time. However, only the burner you are turning on will
ignite.
3. Visually check that tile burner has lit.
4. After tile burner lights, turn the control knob to the desired flame size. The
control knobs do not have to be set at a particular mark. Usethe guides and
adjust tile flame as needed. DO NOT cook with the control knob in the LifE
position. (The electron icignitors will continue to click if one Surface Control knob
is left in the LITEposition, causing premature wear.)
Inthe event of an electrical power outage, the surface burners can be lit manually.
To light a surface burner, hold a lit match to the burner head, then slowly turn the
surface control knob to LITE.Use caution when lighting surface burners manually.
Do not place plastic items such as salt and pepper shakers,
spoon holders or plastic wrappings on top of the range when it is in use.
These items couIdmelt or ignite. Potholders, towels or wood spoons couIdcatch fire
if placed too close to a flame.
Griddle (some models)
Your non-stick griddle must first be "conditioned" to insure non-stick cooking.
Removethe enamel griddle cover. Wipe a teaspoon of vegetable oil over the surface
before using the griddle for the first time.
Do not overheat the griddle asthis will cause permanent staining of the non-stick
coating. You can protect the nomstick coating bykeeping the enamel cover overthe
griddle when not in use.
The griddle isintended for direct food cooking. Do not usepans or other cookware
on the griddle. Doing socould damage the finish. After turning on the griddle burner,
you can check to seeif it isignited by looking at the griddle burner flame reflection
plate through the observation hole. See diagram of Griddle Burner at left.
5th Burner (some models)
The 5th burner pan, chrome bowl insert and a burner grate can be used in place of
the griddle. To usethe griddle area for a 5th burner, remove the griddle and place
the 5th burner pan overthe burner. Then placethe bowl insert and the burner grate
in the proper position. Operate the 5th burner with the griddle control knob.
Loading ...
Loading ...
Loading ...