Casio ECB-40YDC

User Manual - Page 22

For ECB-40YDC.

PDF File Manual, 30 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
The beeper will not sound if battery power
is low.
Using CASIO WATCHES to
Configure Timer Settings
If the watch is paired with a phone, you can
also use the CASIO WATCHES phone app to
set the timer start time.
l
Configuring Timer Settings
Setting the Countdown Start
Time
The countdown start time can be set in 1-
second units up to 24 hours.
If a timer countdown operation is in
progress, reset the timer to its current start
time before performing this operation.
l
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Hold down (B) for at least two seconds.
Release the button when the hour setting
starts to flash.
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
Hours
3. Use (A) and (D) to change the timer hours
setting.
Holding down (A) or (D) scrolls through
settings at high speed.
4. Press (C).
This causes the minutes digits to flash.
Minutes
5. Use (A) and (D) to change the timer
minutes setting.
6. Press (C).
This causes the seconds to flash.
Seconds
7. Use (A) and (D) to change the timer
seconds setting.
8. Press (B) to complete the setting
operation.
Note
Setting a start time of [0:00'00]
performs a countdown of 24 hours.
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
Mode hand
The mode hand points the remaining
timer time. The mode hand points to
[OVER] when the remaining time
exceeds 120 minutes.
2. Use the operations below to perform a
timer operation.
D
D
D
(Time up)
Resume
Pause
(Countdown starts)
Start
A beeper will sound for 10 seconds to
let you know when the end of a
countdown is reached.
You can reset a paused countdown to
its start time, by pressing (B).
3. Press any button to stop the tone.
Watch Operation Guide 5708
22
Loading ...
Loading ...
Loading ...