Loading ...
Loading ...
Loading ...
12
Altitude kit replacement
1. Turn off the engine.
2. Close the fuel valve.
3. Place a bowl under the fuel cup to catch any spilled fuel.
4. Using a 10mm wrench, take off the fixing bolt and bolt seal (5) from the body of the carburetor.
5. Remove the fuel cup (4) and seal (3).
6. Take off main jet (2).
7. Replace the main jet (altitude kit supplied ) with suitable one applying to altitude height.
8. Reassemble the fuel cup seal , fuel cup , bolt seal and bolt . Tighten in place.
9. Commissioning. Make sure generator works correctly after installation.
WARNING:Wipe up any spilled fuel and allow excess to evaporate before starting engine. To
prevent fire, do not start the engine while the smell of fuel hangs in the air.
STOPPING THE GENERATOR
TO STOP THE GENERATOR
1.
Turn off all electrical devices prior to unplugging them from the generator. Unplugging running
devices can cause damage to the generator.
2.
Turn the “ON/OFF” switch to the “OFF” position.
3.
Turn the fuel valve to the “OFF” (horizontal) position.
WARNING: Allow the generator to cool for several minutes before touching areas that
become hotduring use.
CAUTION:Allowing gasoline to sit in the fuel tank for long periods of time can make it difficult to start
the generator in the future. Never store the generator for extended periods of time with fuel in the fuel
tank. Refer to Generator Storage Section.
Part # Description Qty
022010600103 Main jet 1
Loading ...
Loading ...
Loading ...