Loading ...
Loading ...
Loading ...
EW-DX EM 2 rack receiver
145
System -> TX Update menu item
This menu item lets you perform a firmware update for the
transmitters. This update is recommended after you perform a
firmware update for the receiver (see "Updating the firmware
of the receiver").
The firmware versions currently installed on the connected
transmitter can be viewed under the TX Software menu item
for the respective channel (see "Ch 1 / Ch 2 -> TX Software
menu item").
To open the TX Update menu item:
▷In the System menu, navigate to the TX Update menu item.
▷Press the jog dial to open the menu.
The available sender firmware is displayed:
▷Press the jog dial to start the firmware update.
▷Press the SYNC button on the connected transmitter for
3 seconds.
You have about 20 seconds to do this. The progress bar
Loading ...
Loading ...
Loading ...