Loading ...
Loading ...
Loading ...
EW-DX EM 2 rack receiver
141
System -> Link Density menu item
Link Density mode (LD mode)
LD mode doubles the number of usable carrier frequencies in
the available spectrum, as the minimum distance for the equi-
distant frequency grid is halved.
This is achieved by reducing the modulation bandwidth of the
transmitter. This means that a much smaller frequency spac-
ing between neighboring frequencies can be selected, and
therefore more frequencies can be used in the same available
spectrum without intermodulation.
LD mode is recommended if the following criteria are met:
•The required number of channels cannot be achieved using
the normal mode, as there may be only a small spectrum
available.
•The distance between the transmitters and the antennas is
not too great.
To open the Link Density menu item:
▷In the System menu, navigate to the Link Density menu
item.
▷Press the jog dial to open the menu.
The following view is displayed:
▷Turn the jog dial to choose between the On and Off op-
tions.
▷Press the jog dial to save your setting.
▷If you have enabled LD mode, the receiver must be restart-
ed.
Loading ...
Loading ...
Loading ...