Loading ...
Loading ...
Loading ...
InstallationInstructions.
[]
Read theseinstructionscompletelyand carefully.
FlooringUnder theRange
Yourrange,likemanyother householditems, isheavyand
cansettle into soft floorcoveringssuchascushionedvinyl
or carpeting
When m{Mng tile range on this bpe of flooring,
it should be installed on a 1/4" thick sheet of
pl}wood (or similar material) as tollows:
When the floor covering ends at the flont of the
range, the area that the range will rest on should be
buih up _dth pl}wood to the stone level or higher
than the floor c_)vering. This vdll allow the range to
be m_)ved tot cleaning or servicing.
Prepare for Electrical Connection
Effective January 1,1996 the National Electric
Code requires that new construction (not
existing) utilize a 4-conductor connection to
an electric range.
When installing an electric range in new
construction follow Steps 3 and 5 for 4-wire
connection.
Use only a 3-con&_ctor or a 4-conductor UI,-listed
range cord. These cords may be pr{Mded with ring
temfinals on wire and a suain relief device.
A range cord rated at 40 amps xdth 125/250
minimum volt range is required. A 50 amp range
cord is not recommended but if used, it should be
mmked tot use _dth nominal l_!/s"dimneter
connection openings. Care should be token m
center the cable and strain relief within the
knockout hole to keep the edge fiom dmnaging the
cable.
NOTE."A 4-conductorcordistobeusedwhentheapplianceis
installedina mobilehomeor whenlocalcodesdonotpermit
groundingthroughtheneutralIfconduitisbeingused,go to
Step6orZ
30
Loading ...
Loading ...
Loading ...