Loading ...
Loading ...
Loading ...
Doc. 6140223 Rev.-
7/9
INFRARED RECEIVER INSTALLATION
INTRODUCTION
The EZ Touch IR receiver will be required when the PTAC unit has been installed
inside an enclosure that does not allow direct line of sight between the digital
controls and the wireless thermostat.
INSTRUCTIONS
1) If required, drill a 5/8” diameter hole on the front cover, approximately 3
inches below the top, or the top panel of the enclosure, (See illustration 1)
2) Insert the EZ Touch IR remote receiver through the 5/8” diameter hole and
push it in so it will lock in to place
5
/
8” dia. hole
EZ Touch
IR Receiver
Loading ...
Loading ...