Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
Induction zones
PROBLEM POSSIBLE CAUSES WHAT TO DO
The touch controls
are unresponsive.
The controls are locked. Unlock the controls. Refer to
‘Safety features’.
The touch controls are
difficult to operate.
There may be a slight film of water
over the controls or you may be
using the tip of your finger when
touching the controls.
Ensure the touch control area is
dry and use the ball of your finger
when touching the controls.
Some or all displays
flash
and there is
a continuous beep.
Liquid has spilled onto the touch
control area.
Switch the power to the cooktop
off at the wall and see ‘Care and
cleaning’ for instructions.
There are objects on the touch
control area.
Remove the objects from the
touch control area.
Several touch controls are registering
continuous contact (due to someone
resting their hand or arm on the
touch control area for example).
Remove the cause of
continuous contact.
Pans do not become
hot and
appears in
the display.
The cooktop cannot detect the
pan because it is not suitable for
induction cooking.
Use cookware suitable for
induction cooking. See
section ‘Cookware’.
The cooktop cannot detect the
pan because it is too small for
the cooking zone or not properly
centred on it.
Centre the pan and make sure
that its base matches the size of
the cooking zone.
Pans do not become hot.
The heat setting display
comes on, but
does
not flash.
-0- shows in the timer
display when I turn on
the cooktop.
The cooktop is in Display mode. Contact Customer Care or your
Authorised Service Centre.
The cooktop or cooking
zone has turned itself
off, a tone sounds and
an error is displayed
(typically
E or Er)
This indicates a technical fault. Note down the code, switch the
power to the cooktop off at the
wall, and contact your Authorised
Service Centre or Customer Care
with the error code information.
31
Loading ...
Loading ...
Loading ...