Loading ...
Loading ...
Loading ...
10 EN EN 11
Select a Suction Power Level
In the eufy Clean app, select a suction power level according to your
needs: Quiet, Standard (Default), Turbo, and Max.
• When RoboVac starts cleaning next time, it will clean
according to the suction power level you previously
selected.
Select BoostIQ™ Feature
In the eufy Clean app, select the BoostIQ™ feature according to your
needs. RoboVac will automatically increase suction power if it detects
that stronger power is needed to ensure the best clean. BoostIQ™ is
ideal for cleaning thicker carpets and hard-to-sweep messes, which
will reduce the total cleaning time but increase the noise level. If the
vacuuming noise caused by BoostIQ™ disturbs you, you can disable
this feature.
Use the Mopping System
1
Before mopping, peel o the stickers on the waterproof pad
and install it under the Self-Empty Station / Charging Base.
Make sure the waterproof pad is rmly attached to the oor.
1
2
1
2
2
Remove the water tank from the main unit. Open the water inlet
cover to fill the water, then close the cover.
• Only use the cleaning solution designated by eufy,
otherwise it may affect the cleaning effect and damage
the device.
3
Install the water tank back into RoboVac.
Click
4
Remove the mopping cloth from the mopping module.
5
Wet the mopping cloth and wring out excess water. Slide the
mopping cloth all the way back onto the slot of the mopping
module and stick it rmly.
6
Install the mopping module at the bottom of RoboVac until a
click is heard.
Click
7
Start cleaning. RoboVac will automatically vacuum and mop.
During mopping, you can choose among three water levels via
the eufy Clean app.
8
When RoboVac finishes cleaning, remove the water tank, empty
any remaining water, and clean the mopping cloth to prevent
mildew or unpleasant smells. For how to clean and maintain the
water tank, refer to the “Cleaning and Maintenance” section in
this manual.
• When cleaning rugs or upholsteries with RoboVac, please
do not install the mopping module, otherwise the device
may get stuck, dampen the fabrics, or end up in abnormal
routing.
Spot Cleaning Mode
RoboVac intensively cleans a specific area with a size of 4.9 ft × 4.9 ft /
1.5 m × 1.5 m, useful if there is a concentrated area of dust or debris.
When the cleaning of a certain zone is finished, it automatically
returns to the Self-Empty Station / Charging Base.
• Press
on RoboVac to start cleaning in Spot cleaning mode.
4.9ft / 1.5m
4.9ft / 1.5m
Room Cleaning Mode (available via the eufy Clean
app only)
In this mode, your house is automatically divided into several rooms
for cleaning in the eufy Clean app. You can also customize your room
settings in the app. RoboVac will clean the selected rooms only and
return to the Self-Empty Station / Charging Base after cleaning.
• Start Room cleaning only after RoboVac has created the
map.
• It is recommended that RoboVac moves from the Self-
Empty Station / Charging Base to start Room cleaning.
Loading ...
Loading ...
Loading ...