Autel AUTEL MAXITPMS TS508 User Manual

Loading ...

Calibration must always be carried out after the following operations:

 Steering wheel replacement

 Steering angle sensor replacement

 Any maintenance that involves opening the connector hub from the

steering angle sensor to the column

 Any maintenance or repair work on the steering linkage, steering gear

or other related mechanism

 Wheel alignment or wheel track adjustment

 Accident repairs where damage to the steering angle sensor or

assembly, or any part of the steering system may have occurred

1. AUTEL accepts no responsibility for any accident or injury arising from

servicing the SAS system. When interpreting DTCs retrieved from the

vehicle, always follow the manufacturer’s recommendation for repair.

2. All software screens shown in this manual are examples, actual test

screens may vary for each test vehicle. Pay attention to the menu titles

and on-screen instructions to make correct option selections.

3. Before starting the procedure, make sure the vehicle has ESC button.

Look for the button on dash.

Using BMW as an example.

1. Tap the Service application button from the MaxiPRO Job Menu.

2. Tap SAS button and wait for the vehicle manufacturer screen. You can

tap VIN Scan or the vehicle make to acquire vehicle VIN information and

tap Yes to confirm. See

Vehicle Identification on page 20 for detail.

3. Tap the desired function in the SAS function list. The list may vary by

test vehicle.

NOTE

Loading ...

AUTEL MAXITPMS TS508 MaxiTPMS TS508WF TPMS Relearn Tool