Makita GHU04Z User Manual

Loading ...

8 ENGLISH

Protections against other causes

Protectionsystemisalsodesignedforothercausesthatcould

damagethetoolandallowsthetooltostopautomatically.

Take all the following steps to clear the causes, when the tool

hasbeenbroughttoatemporaryhaltorstopinoperation.

Turnthetoolo󰀨,andthenturnitonagaintorestart.

2. Chargethebattery(ies)orreplaceit/themwith

rechargedbattery(ies).

3. Letthemachineandbattery(ies)cooldown.

Ifnoimprovementcanbefoundbyrestoringprotection

system,thencontactyourlocalMakitaServiceCenter.

Power switch action

WARNING:

For your safety, this tool is equipped

with lever which prevents the tool from unintended

starting. NEVER use the tool if it runs when you

simply pull the switch triggers without pressing the

lever. Return the tool to our authorized service center

for proper repairs BEFORE further usage.

WARNING: NEVER tape down or defeat pur-

pose and function of the lever.

WARNING:

Before installing the battery car-

tridge on the tool, always check to see that the

switch triggers and lever actuate properly and return

to the "OFF" position when released. Operating a tool

withaswitchthatdoesnotactuateproperlycanleadto

lossofcontrolandseriouspersonalinjury.

CAUTION: Never put your nger on the

switch triggers when carrying.Thetoolmaystart

unintentionallyandcauseinjury.

NOTICE:

Do not pull the switch trigger hard without

pressing the lever. This can cause switch breakage.

Pressthemainpowerbuttontoturnonthetool.Toturno󰀨thetool,

pressandholdthemainpowerbuttonuntilthespeedindicatorsgoo󰀨.

Fig.4

►1. Main power button

NOTE: The caution lamp brinks if the switch trigger

is pulled under unoperatable conditions. The caution

lampblinksifyouturnonthemainpowerswitchwhile

holding down the lever and the switch trigger.

NOTE:

Thistoolemploystheautopower-o󰀨function.To

avoid unintentional start up, the main power switch will auto-

maticallyshutdownwhentheswitchtriggerisnotpulledfor

a certain period after the main power switch is turned on.

Topreventtheswitchtriggerfrombeingaccidentally

pulled, the lever is provided. To start the tool, pull the

front switch trigger, and then pull the rear switch trigger

whilepressingthelever.Whenyoureleaseeitherofthe

switch triggers, the tool stops.

Fig.5

►1. Lever 2. Rear switch trigger 3. Front switch

trigger

Speed adjusting

Youcanadjustthetoolspeedbypressingthemain

powerbutton.Eachtimeyoupressthemainpower

button, the level of speed changes.

Fig.6

►1. Speed indicator 2. Main power button

Speed indicator Mode Stroke speed

High 5,000 /min

Medium 3,600 /min

Low 2,000 /min

Loading ...

Makita GHU04Z 40V max XGT Brushless Cordless 24" Single‑Sided Hedge Trimmer, Tool Only

User Manual - Page 8