Loading ...
Loading ...
Loading ...
Attach the wheel (10) to the left side of the axle.
Secure the wheel in place with a hub cap (K). See
figure 5.
Attach the (RH) and (LH) hitch tubes to the frame tube
using four 1/4" x 2" hexbolts (C) and 1/4" nylock nuts
(D). Tighten. See figure 7.
FIGURE 5
K
FIGURE 7
D
Assemble the (RH) and (LH) hitch tubes to the control
tube using two 1/4" x 1-3/4" hex bolts (B) and 1/4"
nylock nuts (D). Tighten. See figure 6.
Assemble the plastic caps onto the ends of the hitch
tubes and control tube as shown in figure 6.
F
..... F
Assemble the Control Cable to the Hitch Control Tube
using the carriage bolt and nylon wing nut. Tighten.
See figure 8.
FIGURE 8
FIGURE 6
Loading ...
Loading ...
Loading ...