Loading ...
Loading ...
Loading ...
TOOLS REQUIRED FOR ASSEMBLY
(2) 7/16" Wrenches
REMOVAL OF PARTS FROM CARTON
• Remove all parts and hardware packages from the
carton. Lay out all parts and hardware and identify
using the illustrations on page 3.
• Insert the two hex flange bearings (I) into the frame
tube. See figure 1.
• Attach the hopper to the frame tube using two 1/4" x
1-1/2" hex bolts (A), 1/4" washers (H), and 1/4" nylock
nuts (D) as shown in figure 3. Tighten.
• Insert the agitator hairpin (G) into the hole at the top
of the impeller. See figure 3.
H
G
I
..... A
÷
H
FIGURE 3
FIGURE 1
• Insert each side of the axle of the impeller assembly
into the frame tube. See figure 2.
Attach the drive wheel (9) to the right (indented) side
of the axle. Secure the wheel in place with a hub cap
(K). See figure 4.
J
K
FIGURE 4
FIGURE 2
4
Loading ...
Loading ...
Loading ...