Loading ...
Loading ...
Loading ...
The water filter status light, located at the top of the refrigerator
compartment, will help you know when to change your water
filter cartridge. When the water filter status light changes from
green to yellow, this tells you that it is almost time to change the
water filter cartridge (90% of the filter life has been used). It is
recommended that you replace the water filter cartridge when the
water filter status light changes to red OR water flow to your
water dispenser or ice maker decreases noticeably. To change
the water filter cartridge, see "Changing the Water Filter
Cartridge" later in this section.
INDICATOR: STATUS:
GOOD (green) New filter installed
ORDER (yellow) Order filter, 10% filter life remains
REPLACE (red) or when Replace water filter
water flow decreases
After changing the water filter cartridge, reset the water filter
indicator by pressing and holding the RESET for 2 seconds. The
status light will change from Replace (red) to Good (green) when
the system is reset.
WA_ER FIL_ER
eOOD•
_D_ 0 RESET
RmACEO
Non-Indicator Water Filter (on some models)
if your refrigerator does not have the water filter status light, you
should change the water filter cartridge every 6 to 9 months
depending upon your usage. If the water flow to the water
dispenser or ice maker decreases noticeably before 6 months
have passed, replace the water filter cartridge more often.
Style 1: Behind the base grille filter
1. Remove the base grille (see "Door Removal" section). Rotate
the cartridge counterclockwise to a vertical position and pull
the filter cartridge out.
NOTE: There will be water in the cartridge. Some spilling may
OCCUR
2.
3,
Take the new cartridge out of its packaging and remove
protective cover from o-rings.
Push the new filter cartridge into the base until it stops.
Rotate the cartridge clockwise to a horizontal position. Flush
the water system (see "Flushing the water system after
replacing filter" later in this section).
Style 2: Through the base grille filter
1. Locate the water filter cartridge cap in the front base grille.
Rotate the cap counterclockwise to a vertical position and
pull the cap and filter cartridge out through the base grille.
NOTE: There will be water in the cartridge. Some spilling may
occur.
2. Remove the cartridge cap by sliding it off the end of the old
cartridge. The cap will slide to the left or right. DO NOT
DISCARD THE CAR
3. Take the new cartridge out of its packaging and remove
protective cover from o-rings.
NOTE: Do not use with water that is microbiologicany unsafe
or of unknown quality without adequate disinfection before
or after the system. Systems certified for cyst reduction may
be used on disinfected waters that may contain filterable
cysts.
Changing the Water Filter Cartridge
4. Slide the cartridge cap onto the new cartridge. See
illustration in Step 2.
5. With cartridge cap in the vertical position, push the new filter
The base gdlle water filter is located below the freezer cartridge into the base grille until it stops. Rotate the cartridge
compartment door. Depending on your model, you may have a cap clockwise to a horizontal position. Flush the water
filter that is installed behind the base grille (Style 1) or a filter that system (see "Flushing the water system after replacing filter"
is installed through the base grille (Style 2). later in this section).
13
Loading ...
Loading ...
Loading ...