Loading ...
Loading ...
Loading ...
26
5. Press and hold both the on/off
switch and the espresso button
(for approx. 5 seconds) until
2 beeps sound.
6. Release the buttons.
The "Descale" symbol is lit
up and ...
... the espresso button
flashes.
7. Press the espresso button
to start the descaling process.
The "Descale" symbol
flashes.
The descaling process begins. The descaling process takes about 15 minutes.
The machine pumps descaling solution into the pipes several time
s at short
intervals. Each time, a small amount of water runs into the container.
8. Pour out the dispensed water in
time to ensure that the container
does not overflow.
When finished, the "Descal-
ing" symbol lights up, and
the "Fill water" symbol and
...
... the espresso button
flash.
9. Take the water tank out of the
machine.
10. Thoroughly clean the water tank
as described in the "Cleaning"
chapter / section "Cleaning the
water tank".
Rinsing phase
11. Place an empty container (with
a capacity of at least 17 US.fl.oz
(500 ml)) under the coffee spout.
Remove the drip bowl if neces-
sary.
You will possibly need to empty
this container several times
during the rinsing
phase.
12. Fill the water tank with cold tap
water up to the MAX mark.
13. Reinsert the water tank in the
machine and push it down as far
as it will go.
The "Refill water" symbol
goes out and the rinsing
phase begins automatically
after a few seconds.
109547 en Kaffeevollautomat_USA_v4.indd 26109547 en Kaffeevollautomat_USA_v4.indd 26 31.08.22 09:5131.08.22 09:51
Loading ...
Loading ...
Loading ...