Arc 04-ZVGR-0O8D User Manual

Loading ...

3. Connect your plasma cung torch and ground cable to the front panel of the machine.

Make sure the ground cable is connected on the right hand side where the “+” sign is located.

(Figure 1.4)

- Set TIG Weld /Sck Weld /Plasma Cut to Plasma Cut mode.

- Set “2.5S/5S” to “2.5S” mode.

- Set “Machine/PEDAL” to “Machine” mode.

- Adjust current dial between 10 and 50 amps.

4. Aach the ground clamp to the metal you want to cut. Grind the metal to make sure the clamp

is securely aached to the work piece. Press the trigger of the torch and make sure the air is

owing. Finally, move the torch head to the work piece and start cung.

5. Change your consumables (p, electrode, ring and cup) if they are worn out. The consumables’

type is PCS. If you want to cut the perfect circle or perfect straight line, order a Lotos

LCK roller guider compass kits from our website www.uwelding.com.

1. Wear our auto darkening helmet and gloves to protect your eyes and hands from any harmful

welding arc. (Please see step 1 in Plasma Cung.)

2. Connect the machine gas inlet (on the back of the machine, Figure 1.5) to the argon regulator

and adjust the knob to set gas pressure between 15 and 20 min/L (an argon regulator is

necessary, Figure 1.6.)

For TIG Welding:

Figure 1.4

Plasma

Torch

Output

5-pin

Switch

Plug

2

Ground

Cable

Pilot

Arc

Loading ...

Arc 04-ZVGR-0O8D LOTOS LTPDC2000D Non-Touch Pilot Plasma Cutter Tig Welder and Stick Welder 3 in 1 Combo Welding Machine,½ Inch Clean Cut,Brown