Loading ...
Loading ...
Loading ...
OPERATION
TIG Welding Funcon
1) While this welding & cung equipment is operated, the power supply indicator is on, and
the built-in fan will funcon.
2) Switch to the TIG welding funcon mode.
3) Press the gas release buon and modulate the volume of gas output to the required
value.
4) Press the buon on the welding torch and the electromagnec valve will funcon. The
sound of releasing electricity is audible and there is gas coming out of the welding torch.
Please note: Before the inial welding operaon, press the buon on the welding torch for
several seconds in order to remove the gas inside the gas tub, and the welding operaon is
accessible. There is gas output within a few seconds aer the welding operaon, that is a
special design to protect the welding point before it cools down. Therefore, aer the arc is
gone, maintain the welding posion unl the heat produced during the welding operaon
dissipates.
16
MMA Funcon
1) Switch to MMA welding mode.
2) While this welding & cung equipment is operated, the power supply indicator is on and
the built-in fan will funcon.
3) According to the thickness of the work piece, adjust the welding current output and choose
the rod, then the MMA welding can begin.
5) The welding current output is adjustable, according to the thickness of the welding material
and required crasmanship.
6) Maintain a distance of 1-4mm between the tungsten electrode and the work piece. Press
the buon on the welding torch. HF electricity will release between the welding electrode
and the work piece. Aer the arc starts, the splash of the HF arc will vanish and the welding
operaon can begin.
Loading ...
Loading ...
Loading ...