Loading ...
Loading ...
Loading ...
Avoid Service Checklist
Before you call for service - read this
You may savethe cost and inconvenience of an unnecessary service call by first reviewing this easyto use Avoid-Service Check List
of the most frequently encountered situations that are not the result of defective workmanship of materials.
You will be charged for a service call while the appliance is in warranty if the problem is not caused by defective product
workmanship or materials.
Your new appliance isa carefully engineered product. Many times, what appears to be a reasonto call for service requires nothing
more than a simple adjustment you can easily make in your own home or is normal operating characteristic of appliance under
certain conditions.
This list is applicable to a variety of models; some of the items will not necessarily apply to your appliance.
PROBLEM POSSIBLE CAUSE/SOLUTION
INSTALLATION
Range is not level.
Cannot move appliance easily.Ap-
pliance must be accessible for
service.
RANGE DOES NOT OPERATE
Poor installation. Placeoven rack in center of oven. Adjust leveling legs(slide-in models) at
baseof range until the oven rack is level.
Besure floor is leveland isstrong and stable enough to adequately support range.
If floor issagging or sloping, contact a carpenter to correct the situation.
Kitchen cabinet alignment may make range appear unlevel. Be sure cabinets are square
and have sufficient room for range clearance.
Cabinets not square or are built in too tightly. Contact builder or installer to make appliance
accessible.
Carpet interferes with range. Provide sufficient space so range can be lifted over carpet.
Entire range or oven does not
operate.
Make sure cord/plug isplugged tightly into outlet.
Servicewiring is not complete. Contact your dealer, installing agent or authorized servicer.
Power outage. Check house lights to be sure. Call your local electric company for service.
Oven does not operate. Oven control beeps and displays -F1-, -F3- or -F9-. Electronic control has detected a fault
condition. Pushthe CANCEL pad to clear the display and stop the beeping. Reprogram
oven. If fault recurs, record fault number, push CANCEL pad and contact authorized
servicer.
Oven light does not work.
Surface unit does not heat.
Replaceor tighten bulb. SeeChanging Oven Light in this Owner's Guide for instructions.
No power to the appliance. Check steps under "Entire Appliance Does Not Operate" in this
Avoid Service CheckList.
Incorrect control setting. Make sure the correct control ison for the surface unit to be used.
22
Loading ...
Loading ...
Loading ...