Ancona AN-1318 User Manual & Installation Instructions

Loading ...

— 11 —

Installation

STEP 6

Preparations

NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.

• Determine and mark the centre line on the ceiling or wall where the range hood will be installed.

• Make sure there is proper clearance within the ceiling or wall for exhaust vent.

•

Duetotheweightandsizeofthisunit,pleasemakesurethatthesupportsystemorframeworkbeingusedisstableand

secure in the ceiling or wall.

• Put a thick, protective covering over counter top, cooktop or range to protect from damage or dirt.

•

Removeanyhazardousobjectsaroundtheareawheninstalling.

CAUTION

If moving the cooking range is necessary to install the hood, turn OFF the power on an electric range at the main

electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.

Fig #1

STEP 7

Preparing the Cabinet

• Measure and cut an opening at the bottom of the cabinet

to t the motor box of the range hood. (See Fig #1)

• Measure and cut a hole in the top of cabinet to t the duct

tube. (See Fig #1)

• Note that the hole in the top of the cabinet may not be

necessary depending on venting method chosen. (See

Page 10).

STEP 8

Attaching Damper Flap

• Fixthedamperapintothedamperholeontopoftherangehoodmotorbox.

(See Fig #2).

Fig #2

Cut-out dimensions:

28 in.: 26.25 in. x 10.25 in.

(67 cm x 26 cm)

36 in.: 34.25 in. x 10.43 in.

(87 cm x 26.5 cm)

Loading ...

Ancona AN-1318 28 in. Ducted Stainless Steel Undercabinet Range Hood Insert