Loading ...
Loading ...
Loading ...
9 OPERATION
IMPORTANT
Before you operate the machine, read and understand
the safety regulations and the operation instructions.
WARNING
Be careful when you operate the machine and always
observe your surroundings before operating tool.
9.1 START THE MACHINE
1. Push the lock-out button (1) and pull the trigger (2).
1
2
9.2 STOP THE MACHINE
1. Release the trigger to stop the machine.
9.3 ADJUST THE LENGTH OF THE
CUTTING LINE
NOTE
The machine has an auto-feed head. If the cutting line
does not automatically advance, it can be tangled or
empty.
1. Start the machine and keep 3s. Release the trigger
until the machine totally stops.
2. Repeat the above step until you can hear the line-
cutting noise.
NOTE
The line will extend approximately 0.4 in. with each
stop and start of the switch trigger until the line
reaches the cut-off blade and the cut-off blade cuts
the excess length.
NOTE
Do not pull or release the trigger too fast.
NOTE
It will damage the machine if you hit the head to try to
advance the line.
9.4 LINE CUT-OFF BLADE
This trimmer is equipped with a line cut-off blade
on the guard. The line cut off blade continuously
trims the line to ensure a consistent and efficient cut
diameter. Advance line whenever you hear the engine
running faster than normal, or when trimming efficiency
diminishes. This will maintain best performance and
keep line long enough to advance properly.
9.5 ADJUST THE LENGTH OF THE
SHAFT
NOTE
You can adjust the length of the shaft to operate the
machine easily.
1. Stop the machine.
2. Unlock the cam lever and move the lower shaft to
the desired position.
3. Lock the cam lever.
9.6 CHANGE TO THE EDGING MODE
NOTE
You can change the trimmer to an edger to keep
patios, driveways and sidewalks well groomed.
1. Stop the machine.
2. Push on the edge button and rotate the trimmer
head.
9
English
EN
Loading ...
Loading ...
Loading ...