Loading ...
Loading ...
Loading ...
Page 4 • JL Audio, Inc., 2022 Continued on Next Page
STEP 7 PASSENGER SIDE
Thread one supplied 3/8 - 16 x 2-1/4” Set Screw
into each of the two Passenger (indicated)
threaded inserts, leaving 1/2” of the Set Screw
protruding.
Thread one supplied 3/8 - 16 x 3/4” Set Screw
into each of the two Driver (indicated) threaded
inserts, until flush with the surface of the
enclosure.
Note: To prevent air leaks, we recommend applying
teflon tape or thread sealant to all set screws.)
STEP 6 DRIVER
With the rear seat storage compartment
removed from the vehicle, place the two
supplied Wax Squares as shown.
Note: The driver side is shown in the image.
Passenger side installation requires Wax
Square placement shown in
STEP 6 (PASSENGER).
STEP 6 PASSENGER
With the rear seat storage compartment
removed from the vehicle, place the two
supplied Wax Squares as shown.
Note: The passenger side is shown in
the image. Driver side installation requires
Wax Square placement shown in
STEP 6 (DRIVER).
STEP 5
Open the rear seat storage compartment lids
and remove the factory bolts from the
indicated positions within the bottom interior.
Remove the rear seat storage compartment
from the vehicle.
Note: If equipped, the factory subwoofer
harness will need to be unclipped during
the rear seat storage compartment removal.
STEP 4
Flip the driver side seat gap cover panel up.
Remove the two indicated factory nuts and the
panel from the vehicle.
STEP 3
Flip the passenger side seat gap cover panel
up. Remove the two indicated factory nuts and
the panel from the vehicle.
STEP 1
Note: This Stealthbox® can be installed
behind the rear seat on the passenger side,
driver side, or both. For single enclosure
installations, we recommend positioning the
enclosure on the passenger side of the cab.
Clear the rear seat area and fold the rear
seats forward.
SB-D-MGACABG4/10TW1 INSTR_SKU# 011577
STEP 7 DRIVER SIDE
Thread one supplied 3/8 - 16 x 2-1/4” Set
Screw into each of the two Driver (indicated)
threaded inserts, leaving 1/2” of the Set Screw
protruding.
Thread one supplied 3/8 - 16 x 3/4” Set Screw
into each of the two Passenger (indicated)
threaded inserts, until flush with the surface of
the enclosure.
(Note: To prevent air leaks, we recommend applying
teflon tape or thread sealant to all set screws.)
4”
21”
21”
4”
Passenger
Driver
Passenger
Driver
Passenger
Driver
Passenger
Driver
Loading ...
Loading ...