Loading ...
Loading ...
Loading ...
E-7
END OF SEASON STORAGE
• Follow the cleaning and descaling instructions when the humidifier will be stored at
the end of the season.
• Dry the humidifier completely before storing. DO NOT store with water inside the base
or water tank.
• Pack the unit in its original carton and store in a cool, dry location.
NOTE: IF YOU EXPERIENCE A PROBLEM DO NOT ATTEMPT TO OPEN THE MOTOR
HOUSING YOURSELF. DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE
TO THE HUMIDIFIER OR PERSONAL INJURY.
PROBLEM
SOLUTION
Air blows but water vapor
is not produced.
Excessive Water: Empty the water in the base of the unit.
The surface of the ultrasonic disk is dirty: Clean ultrasonic disk.
If you use hard water, replace with softer water.
Humidity level is low.
The surface of the ultrasonic disk is dirty: Clean ultrasonic disk.
The water in the unit is too cold: Replace with cool, but not cold water.
Damage on the ultrasonic disk: Contact Customer Service
The humidity has
a bad smell.
Poor maintenance or dirty water: Clean the product thoroughly, and fill it
with fresh water.
White dust is forming on
nearby furniture.
Hard water may deposit a certain amount of dust. Dust in the air also
settles because of added humidity in the room. Use distilled water if this
becomes a nuisance.
Unit has stopped working.
No or low water. Unplug unit and refill tank.
Water is accumulating
outside of unit or area
surrounding unit.
Saturation of humidity. Lower mist control setting. Unit not level and water
is accumulating. Unplug and place on level surface. Point spray away from
objects. Raise unit on a water-resistant level surface 2-3 feet off of floor.
Increased noise level.
Unit must be placed on a flat, level, hard surface.
Make sure it is NOT placed on a soft or absorbent surface.
E1 on display.
Indicates that the water level is low. Unplug and refill tank.
TROUBLE SHOOTING GUIDE
Humidity measurement
does not match my home
humidistat readings
(hygrometer).
Due to humidistat tolerances between devices different relative humidity
readings can be seen.
Cannot smell aroma scent.
Add a few more drops of oil to the aroma pad or replace aroma pad with
a new one.
Loading ...
Loading ...
Loading ...