Pure Guardian H997W 90-Hour Ultrasonic Humidifier with Humidistat, 1.6 Gallon

Use & Care Instructions - Page 6

For H997W.

PDF File Manual, 24 pages, Read Online | Download pdf file

H997W photo
Loading ...
Loading ...
Loading ...
Add a few drops of your favorite essential oil to the pad
in the tray. (Oil not included)
WARNING: DO NOT add oils or other additives
directly into the water tank. Add only to the pad in
the tray. Oils added to the tank will damage the tank
and the whole unit. Any use of such additives in the
tank will void the manufacturers warranty.
Pureguardian essential oils and replacement pads
sold separately at www.guardiantechnologies.com
BACK OF UNIT
E-6
GENERAL CLEANING
1. Always unplug the unit before servicing in any way.
2. Water tank. Remove the lid and empty the tank by pouring all the water out. Clean the inside
of the tank with fresh water and a soft cloth or the cleaning brush.
3. Outer surface of the unit. Wipe the lid and surface of the unit with a soft, damp cloth if needed.
If you notice an accumulation of water during usage, reduce humidity and dry outer surface
with a cloth.
DESCALING
• Depending on usage and water type, cleaning to remove scale may be required weekly or every
other week to optimize unit performance.
• If you live in a hard water area, we recommend the use of distilled water for your humidifier.
This will help reduce the precipitation of minerals or ‘white dust’.
• Do not clean the unit or water tank with detergents or cleaning chemicals of any kind.
ULTRASONIC DISK
1. Unplug unit.
2. Remove the tank from the base and
e
m
p
t
y
a
l
l
w
a
t
e
r
f
r
o
m
t
a
n
k
a
n
d
b
a
s
e
.
3. Locate the ultrasonic disk on the
inside center of the base unit.
4. Use ONLY the enclosed cleaning brush
to gently clean disk and remove build up
and deposits.
Do not scrub or scrape the ultrasonic disk.
Looking down
at the inside of
empty base.
Ultrasonic Disk
Clean the disk with the
brush only. No other
cleaning tool should
be used. BRUSH ONLY.
If scale becomes difficult to remove with brush:
1. Fill the tank with: mixture of 1 tsp. white vinegar and 1 tsp. water.
2. Let solution stand for 5 minutes.
3. With the vinegar in the tank, clean all interior surfaces with a soft cloth or brush to
help remove scale.
4. Also check mist nozzle and mist tube in water tank. Clean as needed.
5. Rinse the tank thoroughly with water to remove scale and vinegar solution.
Loading ...
Loading ...
Loading ...