Loading ...
Loading ...
Loading ...
GB
20
Malfunction analysis
Phenomenon Check items Solution
Air conditioner can’t operate.
• Power failure? • Wait until power recovery.
• Is plug loose? • Reinsert the plug.
• Air switch trips off or
fuse is burnt out?
• Ask professional to replace
air switch or fuse.
• Wiring has malfunction? • Ask professional to replace
it.
• Unit has restarted im-
mediately after stopping
operation?
• Wait for 3min, and then
turn on the unit again.
• Whether the function
setting for remote
controller is correct?
• Reset the function.
Mist is emitted from indoor
unit’s air outlet.
• Indoor temperature and
humidity is high?
• Because indoor air
is cooled rapidly.
After a while, indoor
temperature and humidity
will be decrease and mist
will disappear.
Set temperature can’t be
adjusted.
• Unit is operating under
auto mode?
• Temperature can’t
be adjusted under
auto mode. Please switch
the operation mode
if you need to adjust
temperature.
• Your required
temperature exceeds
the set temperature
range?
• Set temperature range:
16°C ~30°C.
Cooling (heating) effect is not
good.
• Voltage is too low? • Wait until the voltage
resumes normal.
• Filter is dirty? • Clean the filter.
• Set temperature is in
proper range?
• Adjust temperature to
proper range.
• Door and window are
open?
• Close door and window.
Loading ...
Loading ...
Loading ...