Loading ...
Loading ...
Loading ...
347
PO
S AVE THESE INSTRUCTIONS
(347PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 05/21/2020
English
Page 10
SET UP (continued)
Replace the air valve cap back.
The cap is designed to be screwed on and o. Never exert force
as this could cause the complete internal ination system of the
valve to come loose. See “Spa Tub Air Valve Fastening” for valve
maintenance.
If there is a need to replace the spa tub air pressure release
valve core due to wear and tear, use the included wrench
to unscrew the core from the valve base. Replace a new air pressure
release valve core back. Make sure the core is securely tightened
.
Open the ination valve and insert the ination hose into the
valve; press
to inate until it is rm to the touch but not hard
.
Disconnect the ination hose from the air blower ination outlet
and the valve.
Replace the control base ination latch back; close and recess
the ination valve.
If there is a need to add some air to the spa tub wall or spa
cover air bladder after they have been setup, refer to above “Inate
the Spa Tub Wall” and “Inate the Spa Cover Air Bladder” sections.
The cover air bladder is preinstalled inside the spa cover. If it needs to
be reinstalled, place the uninated air bladder inside the spa cover lip before inating the bladder.
To prevent damage to the air blower motor never
block the air blower outlet opening during ination.
Press the
button again to turn it o.
Loading ...
Loading ...
Loading ...