Loading ...
Loading ...
Loading ...
following all instructions and recommendations listed in this manual
HEATER LOCATION: Place the heater in the area of the room that is coldest.
HEATER CONNECTION: Plug heater directly
Into 120 volt A.C., 60Hz wall outlet. Be sure plug fits tightly in outlet. A
loose connection may cause overheating and damage to the plug or heater.
NOTE: To prevent overloading a circuit, do not plug the heater into a circuit
that is servicing other electrical needs.
Instructions to use
TURNING HEATER ON:
3-D Flame Switch - For Flame Effect Only- Slide Switch main power ON/OFF
switch button to ON position to have the flame effect without any heater
functions.
For Low Heat - Switch Slide main power ON/OFF switch button to ON
position and press Slide switch
“
I
”
button for 750Wto ON position.
For High Heat - Switch Slide main power ON/OFF button switch to ON
position and press slide both switch “I” button and switch “II” button
at the same time for 1500W to ON position.
SETTING THERMOSTAT - After heater has been turned on and the room has
reached the desired temperature, slowly rotate the thermostat knob
Loading ...
Loading ...
Loading ...