Loading ...
Loading ...
Loading ...
Operations
English32
Operations
05 Spin
Press to change the spinning speed for the current cycle.
•
High (Level 5) : Extends the spinning process to effectively
remove moisture from the load. This level uses a stronger
spinning process to remove moisture, so it is not suitable for
wrinkle-free or non-iron fabrics, or overloads.
• (Level 4) : Underwear, t-shirts, jeans, and sturdy cottons.
• (Level 3) : Jeans, wrinkle-free or wash-and-wear items, and
synthetics.
• (Level 2) : Delicate items that require a lower spinning speed.
•
No Spin (Level 1) : The drum does not spin after the nal drain
process.
Rinse hold (All indicators are off): The nal rinse process is
suspended so that the laundry remains in the water. To unload the
laundry, run a drain or spin process.
NOTE
Spin Only : To perform the spin process only, press and hold Spin
for 3 seconds. With the cycle time on the display, press Spin
repeatedly until a desired spinning speed is selected. Then, press
and hold Start/Pause (Hold to Start) to start.
06 Soil
Press to change the soil level for the current cycle.
• Heavy (Level 5) : For extremely soiled loads.
• (Level 4) : For heavily soiled loads.
• (Level 3) : For moderately soiled loads. This setting is best for
most loads.
• (Level 2) : For lightly soiled loads.
•
Light (Level 1) : For barely soiled loads.
07 Pre Soak Press to add 30 minutes of soaking time at the start of the wash
cycle for better stain removal.
08 Alarm Off
Press to turn the alarm sound on or off. When the alarm is off, the
cycle completion melody and the power-off beep will not sound.
However, button and alert sounds will remain on.
09 Delay End
Set the washer to nish your wash automatically at later time.
Choose a delay of between 1 to 24 hours (in 1 hour increments).
(For more information about Delay End , see page 38.)
10 Smart Care This function enables you to check the status of the washer using
a smartphone.
11 Power Press to turn the washer on or off.
Untitled-7 32Untitled-7 32 4/2/2020 2:58:01 PM4/2/2020 2:58:01 PM
Loading ...
Loading ...
Loading ...